1.
Structural Analysis for Piston-Piston Rod Sets of Steering Cylinder of Shearer
采煤机调高油缸活塞-活塞杆组件的结构分析
2.
barrel buffer piston rod assembly
枪管缓冲器活塞杆组件
3.
"After the piston-and-connecting-rod assemblies have been removed from the engine and the pistons and rods separated, the rings should be removed from the piston.."
先将活塞及连杆组件从发动机上拆下再把活塞与连杆分开之后,即可将活塞环从活塞上取下。
4.
The piston-rods connect the pistons to the parts of the engine which they move.
活塞杆把活塞和引擎中被活塞驱动的部件连在一起。
5.
The piston end of the rod is attached to the piston by the piston pin, or wrist pin.
连杆的活塞端用活塞销或销轴安装在活塞上。
6.
Research of Measure System of the Piston and Connecting Rod Base on the LAN;
基于LAN的柴油机活塞—连杆组检测系统
7.
rod that moves or is moved by a piston.
驱动活塞或被活塞驱动的连杆。
8.
The connecting rod is attached to the piston by the piston pin.
连杆与活塞的连接是采用活塞销。
9.
Connecting rods and pistons are removed as assembly from the engine.
把连杆和活塞做为整体组件从发动机上拆卸下来。
10.
piston connecting rod arrangement misalignment
活塞-连杆布置失中
11.
double-acting single piston rod oil cylinder
双作用单活塞杆式油缸
12.
double-acting double piston rod oil cylinder
双作用双活塞杆式油缸
13.
helical spline type actuator
带螺旋活塞杆的液压缸
14.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
15.
marine piston type chiller
船用活塞式冷水机组
16.
This paper analyses the differential control circuit of hydraulic pressure cylinder and its parameter, and works out the ratio of piston and the diameter of piston pole according to the requirement of speed rate.
分析了液压缸差动控制回路的型式和参数，并按速比条件导出了活塞与活塞杆直径的比值关系。
17.
piston pin snap ring
活塞销锁圈, 活塞销扣环
18.
piston diameter at ring lands
活塞环处的活塞直径