说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 快速凝固过程
1.
Simulation of Temperature Field in the Rapid Solidification Process of Nd-Fe-B based on ANSYS
钕铁硼快速凝固过程温度场ANSYS模拟
2.
Modeling and Characterization of the Solidification of Mono-Sized Sn-5wt.%Pb Droplets Produced by the Uniform Droplet Spray Process;
对均匀颗粒快速凝固过程的研究及其冷却行为的预测
3.
Formation Properties of Cluster Structures during the Rapid Solidification of Liquid Ca_7Mg_3 Alloy
液态Ca_7Mg_3合金快速凝固过程中团簇结构的形成特性
4.
Simulation of evolution mechanisms of microstructures during rapid solidification of Al-Mg alloy melt
Al-Mg合金熔体快速凝固过程中微观结构演化机理的模拟研究
5.
Rapid Solidification and Special Coating of Highly Undercooled DD3 Superalloy;
DD3高温合金的深过冷快速凝固及其快速凝固用特殊涂层
6.
Characterization of rapidly solidified Cu-Pb hypermonotectic alloys
快速凝固Cu-Pb过偏晶合金的性能表征
7.
Kinetics of Aging Precipitation of CuCr Alloy by Rapidly Solidification
快速凝固法制备过饱和CuCr合金时效析出动力学
8.
Effect of rapidly-solidification on two-way shape memory in a Cu-Al-Mn alloy ribbon
快速凝固Cu-Al-Mn合金薄带的双程形状记忆效果
9.
Melt Spinning Processing Equipment and the Structure of Mg-5%Zn Alloy Produced by RSP;
单辊快速凝固装置与Mg-5%Zn合金快速凝固组织
10.
Solidified structural characteristics of rapid solidified Sn2.5Ag0.7Cu solder alloy
快速凝固Sn2.5Ag0.7Cu钎料合金凝固组织特征
11.
Influence of Solution Treatment on Microstructure and Properties of Rapidly Solidified Hypereutectic Al-Si Alloys
固溶处理对快速凝固过共晶铝硅合金组织性能的影响
12.
Study on the Mathematical Model of Solidification Thermal Transmission in the Process of Continuous Casting Slab with Speed Changing;
连铸板坯变拉速过程凝固传热数学模型研究
13.
The results demonstrate that solidification process may be divided into two stages: quasi-state stage and accelerating stage.
结果表明其凝固过程分为凝固准稳态阶段和凝固加速阶段两个阶段。
14.
Study on Co Free and over Stoichiometric AB_5 Type Hydrogen Storage's High Rate Discharge Performance;
快速凝固过化学计量比无钴AB_5型储氢合金高倍率放电性能的研究
15.
The Microstructures and Properties of Rapidly Solidified Copper-Lead Monotectic Alloys from Highly Undercooled Melts;
Cu-Pb偏晶合金熔体的深过冷快速凝固及组织与性能
16.
Rapid Solidification of Undercooled Low-melting Babbit Journal Bearing Alloys;
巴氏低熔点滑动轴承合金的深过冷与快速凝固研究
17.
Rapid Solidification of Undercooled Water and Alloy during Acoustic Levitation and Free Fall;
声悬浮和自由落体条件下深过冷与快速凝固研究
18.
State Key Laboratory of rapidly solidified Non-equilibrium
快速凝固非平衡合金国家重点实验室