1.
Application of WinCC Archive Used in Masteel Hefei Company Wire Rod Mill;
WinCC用户归档在合钢线材轧制表上的应用
2.
Analysis of Surface Crack of Steel Pipe Rolled by 3-h Pipe Mill
三辊轧管机轧制的钢管表面裂纹缺陷控制
3.
The simulation result shows that the effect by the feeding angle and toe angle on the distribution of cross-rolling characteristic values along the rolling centre line in cross-rolling operation is following a certain law.
模拟结果表明，斜轧送进角和辗轧角对沿轧制中心线斜轧特征值分布形态的影响有一定的规律。
4.
skin ausrolling
表面加热轧制形变热处理
5.
Study on Control of Flatness and Surface Roughness on Cold Strip Rolling Mill;
冷轧薄板板形与表面粗糙度控制研究
6.
The Development of Hot Rolled Black Surface Beam Steel Plates for Automobiles
汽车大梁用热轧黑皮表面钢板的研制
7.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
8.
close continuous mill
多机轧制的连续式轧机
9.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
10.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
11.
The Study of Hot Rolling Lubrication Effects on Surface Quality of the Steel Sheet
轧制润滑对带钢表面质量及组织影响研究
12.
Strip profile multi-factor description and high-quality steel rolling control in hot rolling
热轧带钢横截面多参数表示及高精度板形控制
13.
Control of Surface Quality of Cold Rolled and Hot Dip Galvanized Strip From Hot Strip Produced by CSP
CSP热卷生产冷轧镀锌产品表面质量控制
14.
Development of Hot Rolled Black Surface 355L Beam Steel Plates for Automobiles
汽车大梁用热轧黑皮表面钢板355L的研制
15.
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
16.
Study of Roller Vibration in Rolling Processes of Cold Tandem Rolling;
冷连轧机轧制过程中轧辊振动的研究
17.
The Determine of Rolling Mill Draught Pressure and Analysis of Stress-Strain in Rolling Process;
轧机轧制过程轧制压力的确定及应力应变分析
18.
Analysis of factors affecting rolling force in rolling zone of eccentric shafts with cross wedge rolling
偏心轴楔横轧轧制区轧制力影响因素分析