1.
Research on Grinding Method of Drilling Cutter's Flank
基于钻削刀具后刀面刃磨方程建立的研究
2.
Research on Cutting Performance of Coated Tools under Dry Drilling Al-Si Alloy;
涂层刀具干式钻削铝硅合金的切削性能研究
3.
Research on Chip Removal and Cutting Tool Condition Monitoring Technology in BTA Deep Hole Drilling;
BTA深孔钻削排屑与刀具状态监测技术研究
4.
"Effective Region" Characteristic of Tool Lifespan Improvement in Vibration Drilling of Micro-hole
振动钻削微孔提高刀具寿命的“有效区”特征
5.
drill and turning tool holder
钻孔与车削两用刀夹
6.
In this case, the cutting tool, that is, the drill, turns fast, but the workpiece doesn't move at all.
在这种情况下，切削刀具即钻头快速转动，但工件却根本不动。
7.
Study on the Cutting Performance of Multicomponent Coated Hss Tools--Wear Rule and Failure Mechanism Under Dry Drilling;
多元复合涂层高速钢刀具切削性能研究——干式钻削时的磨损规律和失效机理
8.
Principles of Metal Cutting & Cutters
金属切削原理及刀具
9.
combined pipe tap and drill
管用钻孔攻丝复合刀具
10.
The cutting tool must be harder than the material to be cut.
切削刀具必须比要切削的材料硬。
11.
The Role of the Arc of Cutting Edge in Precision Metal Cutting
刀具切削刃圆弧在精密切削中的作用
12.
Identification of Cutter Breakage in Variable Cutting Parameters Milling;
变切削参数铣削加工中刀具破损辨识
13.
Identification of Cutter Wear in Variable Cutting Parameters Milling;
变切削参数铣削加工中刀具磨损辨识
14.
A twist drill is designed to drill a hole which has a particular size.
麻花钻用来钻削具有一定尺寸的孔。
15.
Two or more cutters, rotating freely on ball-bearings, are set in the head of the bit.
可在钻头上安装两个或更多的支在滚珠轴承上自由旋转的切削刀具。
16.
In electrochemical machining, the tool is the cathode and the workpiece is the anode.
在电化切削时,刀具是正极,工具是负极。
17.
A cutting tool is wear-resistant if it resists abrasion at the cutting edge and along the tool face. Wear resistance improves as cutting tool hardness increases.
如果切削刀具的刃口和刀面耐磨,刀具就不易磨损。切削刀具的硬度越高,耐磨性就越好。
18.
A single-point tool has only one cutting edge, while a multiple-point tool has two or more cutting edges.
单刃刀具只有一个切削刃，而多刃刀具有两个或两个以上的切削刃。