1.
Experimental Research on Tool Wear in High Speed Milling of PH13-8Mo Stainless Steel with Cryogenic Minimum Quantity Lubrication
低温微量润滑高速铣削PH13-8Mo刀具磨损试验研究
2.
Study on the High Speed Milling of Titanium Alloy Based on Cooled Gaseous Nitrogen and Minimal Quantities of Lubricant Technology;
基于低温氮气和微量润滑技术的钛合金高速铣削技术研究
3.
The experimental results indicate that cryogenic nitrogen gas jet with minimal quantities of lubricant is the most effective cooling and lubricating mode to reduce milling force and to retard tool wear.
试验结果表明，低温氮气射流结合微量润滑能够最有效地降低铣削力，抑制刀具磨损。
4.
cold sluggish lubrication
低温下流动迟缓的润滑作用
5.
testing method for deleterious particles in lubricating grease
润滑脂中有害微粒物含量测定法
6.
Study of the Lubricant Film Formation Characteristic and Temperature Distribution in Nanogap under High Pressure;
高压微间隙润滑成膜特性及温度场分布的研究
7.
This armor is well-oiled mnd magically constructed, so not only is it nearly silent, it also dampens surrounding sounds.
蹑行：在润滑剂和魔法的辅助下，这件护甲不但几乎不会发出声音，甚至还能稍微降低四周的音量。
8.
Experiment Study with Oils on Water (OoW) as Coolants and Lubricants in Green Cutting;
微量油膜附水滴冷却润滑机理应用试验研究
9.
The Surface Roughness Research of Stainless Steel 0Cr18Ni9 Under the Condition of Dry-cutting and Minimum Quantity Lubricating
0Cr18Ni9在干切削和微量润滑下表面粗糙度的研究
10.
Research on Cutting Experiment in Combination with Microdose Cooling and Lubrication Coated Tools
微量润滑冷却与涂层刀具结合的切削试验研究
11.
Study on Influencing Factors of Machining Performances in Minimum Quantity Lubrication (MQL)
微量润滑切削加工性能影响因素的研究
12.
Experimental analysis of minimal quantity lubrication in milling high-strength steel
高强钢铣削中微量润滑技术效果的试验分析
13.
Rolling Bearing Lubrication Multi-steps Pump Driven by the Straight Line Servo Motor
微量可调式滚动轴承润滑用多级柱塞泵
14.
The benefit is generally a lower oil consumption plus lower wear
该润滑油主要的好处在于它具有较低的润滑油耗油量，以及较低的磨损。
15.
"Also, it must act as a good cleaning agent, must pour at low temperatures, and must have good viscosity at extremes of high and low temperature."
润滑油必须具有良好清洁作用和良好的低温流动性,以及在高温和低温时都具有良好的粘性。
16.
dashboard oil thermometre
前隔板润滑系统温度计
17.
temperature controlled spindle lubricating unit
温控式主轴润滑装置
18.
the tribology materials and lubricants for high temperature application or with low friction and long service life ;
适合于高温应用的或具有低摩擦长寿命的摩擦学材料和润滑剂;