1.
Non-linear analysis on cast tubular T-joints loaded by out-plane bending
平面外弯矩作用下的T形铸钢节点承载力非线性分析
2.
Out-of-Plane Bending Moment Analysis of the Plastic Limit for the Welded Piping Tee Containing Bottom Thinning Defects
底部减薄焊制三通的塑性极限面外弯矩分析
3.
Experimental Verification on the Calculation of the Castellated Beam-Columns′ Stability and Carrying Capacity in Plane
蜂窝式压弯构件弯矩作用平面内稳定承载力计算的试验验证
4.
The Study on In-Plane Equivalent Bending Moment Coefficient of Tapered Portal-Frame-Column without Brace
无侧移楔形变截面门式刚架柱平面内等效弯矩系数研究
5.
Out-of-plane Stability Analysis of Tapered I-sectioned Beam-columns with Slender Web;
楔形宽薄腹工形截面压弯构件平面外稳定分析
6.
The Equivalent Width of Shear Wall in Bending at Non-planar;
钢筋混凝土剪力墙平面外受弯等效宽度计算
7.
Experiment Research on Out-of-Plane Flexural Capacity of Brick Wall with Pilaster Reinforced by GFRP;
GFRP加固带壁柱砖墙平面外抗弯性能试验研究
8.
The concrete wall is suffered with horizontal shear force and moment in the plane of the wall.
通常钢筋混凝土墙主要用于承受水平剪力作用及承受墙平面内的弯矩作用。
9.
Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment
面内弯矩下双弯头组合管件的极限载荷研究
10.
A Method of the Moment Diagram for Predicting the Deflection of Structure and Its Application;
结构位移计算的弯矩图面积法及应用
11.
Analysis of Moment-curvature Hysteresis Behavior of Composite Beams
组合梁截面弯矩—曲率滞回性能分析
12.
The Test and Theory Study in the In-Plane Stability Capacity of Hot-rolled H-section Columns under Eccentric Load;
热轧H型钢偏心受压构件在弯矩作用平面内极限承载力的理论与试验研究
13.
Research on seismic behavior of unstiffened thick-walled tubular X-joints under out-of-plane bending
X型厚壁圆管相贯节点平面外受弯抗震性能试验研究
14.
Parametrical analysis and design formulas for out-of-plane bending rigidity of CHS X-joints
单层网壳X型圆管节点平面外抗弯刚度的参数分析与计算公式
15.
Experimental study on out-of-plane bending performance of tubular joints in steel roof for the Shanghai Synchrotron Radiation Facility
上海光源工程屋盖钢管节点平面外受弯性能试验研究
16.
CNC horizontal surface grinding machine with rectangular table
数控卧式矩台平面磨床
17.
precision surface grinding machine with horizontal spindle and rectangular table
精密卧轴矩台平面磨床
18.
glass plate, cut to non-rectangular shape or further worked than merely surface ground or polished
切割成非矩形的平板玻璃,经除表面研磨或抛光以外的进一步加工