1.
Analysis and reaction to loose defect of boroniron casting cylinder liner
硼铸铁气缸套疏松的分析及解决措施
2.
Internal combustion engines--Cast iron wet type cylinder liners--Specification
GB/T1150-1993内燃机湿式铸铁气缸套技术条件
3.
"In aluminum Blocks, cast-iron or steel cylinder sleeves (also called Bore liners) are used."
由铝铸造的气缸中,装有铸铁．或钢制的气缸套(或称之为气缸衬套)。
4.
Application of TiC Cast Iron Material in Cylinder-bush
浅述TiC铸铁材料在气缸套中的应用
5.
Therefore, the cylinders in most aluminum engines are lined with iron or steel sleeves.
因此，在大多数铝制发动机的气缸内镶有铸铁或者钢的轴套。
6.
"The cylinder head is usually cast in one piece from iron, from iron alloyed with other metals, or from aluminum alloy."
气缸盖通常由铁、铁合金或铝合金铸成。
7.
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样，气缸盖是由铸铁或者铝合金制成。
8.
M3500 Vermicular Iron Cylinder Foundry Technique Majorization Based on AnyCasting
基于AnyCasting的M3500蠕铁气缸盖铸造工艺优化
9.
The Basic Study of the Producing of Bainite Grey Cast Iron Cylinder;
贝氏体灰铸铁汽缸套生产工艺基础研究
10.
The Study of lonitrocarburizing of Gray Cast Iron and Its Application in the Cylinder Liners and Piston Rings of Diesel Engines
灰口铸铁加钛离子软氮化研究及其在柴油机气缸套和活塞环上的应用
11.
Forming Principle of and Countermeasures to Blowhole in Cylinder Head of High Strength and Thin Wall
高强度薄壁灰铸铁气缸盖气孔形成机理与对策
12.
Effect of Casting Process and Alloying Elements on Cutting Performance of Cylinder Sleeve
铸造工艺及合金元素对气缸套切削性能的影响
13.
Research on the Wear Resistance of Micro-structure of Alloy-cast-iron Cylinders and Wear Mechanism Analysis;
合金铸铁缸套微观组织耐磨性研究及磨损机理分析
14.
The cooling liquid is water. Antifreeze compounds are added to the water during the winter. The water jacket are cast into the cylinder Blocks and heads.
冷却液是水。冬季在水中须加人防冻剂。水套被铸人气缸体和气缸盖内部。
15.
RESEARCH ON COMPLEX FOUNDRY TECHNIQUE OF HIGH STRENGTH GRAY IRON FOR CYLINDER BODY & ITS CAP
汽缸体、汽缸盖用高强度灰铸铁的综合铸造技术
16.
In most cars, this block is made of gray iron, or an alloy( mixture) of gray iron and other metals, such as nickel or chromium.
在大多数汽车里，气缸体由灰铸铁或者一种灰铸铁和其他金属的合金(合物)成，例如镍或铬。
17.
"For most engines, cast iron has been found to be a satisfactory cylinder-wall material."
在大部分发动机中,采用铸铁做为气缸壁的良好材料。
18.
jacket water circulating pump
气缸套冷却水循环泵