1.
Impact of Lead-Free Solder on the Result of Soldering Resistance Test
采用无铅焊料对测覆铜板耐浸焊结果的影响
2.
Excellent in solderability and high heat resistance with either flow or reflow soklering.
可焊性和耐焊性优，适用于流焊和再流焊。
3.
determination of resistance to liquids:water immersion method
耐液体浸蚀的测定 -第2部分:浸液法
4.
Study on Iron Based High Temperature Wear Resistance Surfacing Electrode and Welding Process;
铁基高温耐磨堆焊焊条及焊接工艺研究
5.
Microstructure of hardfacing metal and matrix materials with high abrasive flux-cored wire
高耐磨药芯焊丝堆焊组织及基体选择
6.
Research on Corrosion Resistance of Overlaying Welding Layer Using A102,A132 and A302 Stainless Steel Electrode
A102、A132和A302焊条堆焊层耐蚀性研究
7.
Experimental study circumferential weld residual stress of submarine pressure hull
潜艇耐压壳环焊缝焊接残余应力模拟实验研究
8.
Study on Wear Resistance of the Electrodes of Cr13 Alloy System for Valve Sealing Surface;
Cr13系阀门密封面堆焊焊条耐磨性的研究
9.
The Development of Metal Powder-cored Wire for Submerged Overlaying with High Hardness and Toughness;
高硬度高韧性耐磨埋弧堆焊用药芯焊丝的研制
10.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
11.
Development of Advanced Performance Self-shielded Flux-cored Wire for Hardfacing;
高性能耐磨堆焊用自保护药芯焊丝的研制
12.
The Application of Cognex's Production in SAW Weld Tracking System
康耐视产品在埋弧焊焊缝跟踪系统中的应用
13.
Research on Microstructure and Property of Flux-cored Welding Wire Wear-resistant Overlay
药芯焊丝堆焊耐磨覆层组织性能试验研究
14.
Drying time before flooding should be more than 16 hours.
达到耐浸干燥需经过16小时的干燥。
15.
The Influence of Ni and V on the Corrosion Resistance of Hot-dipped Galvanizing Coating
Ni和V对热浸镀锌层耐蚀性能的影响
16.
Resistance spot welding in aluminum alloy was tested by ultrasonic immersion method with focusing probe.
介绍采用水浸超声聚焦回波检测铝合金电阻点焊焊核直径。
17.
CONTAINING TI AND B HARD--FACING EELECLRDE RESEARCH ANALYSIS FOR THE HARDNESS WEAR-RESISTING ANTI-ARAC PROPERTY
含钛硼堆焊焊条研究——堆焊金属的抗裂、硬度、耐磨性分析
18.
Study on the Corrosion Resistance of Carbon Steel Welding Seam Welded by Modified Welding Rod in the Ammonium Sulfite Solution;
改性焊条焊接碳钢焊缝在亚硫酸铵介质中的耐蚀性研究