说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 模板式钢套箱
1.
Application of the template steel boxed cofferdam on underwater bearing platform construction
模板式钢套箱在水下承台施工中的应用
2.
Stimulation and optimization design of a new outer plate of the anti-ship collision steel cofferdam
新型防船撞钢套箱外板的数值模拟与优化分析
3.
The steel pipe supporting and bamboo slab rubber bottom dieing construction in fish bellied continuous box beam bridge
鱼腹式连续箱梁桥的钢管支架竹胶板底模施工
4.
Construction Method of Steel Pipe Scaffold Bamboo Formwork for Fish-bellied Continuous Box Girder Bridges in City
城市鱼腹式连续箱梁桥采用钢管支架竹胶板底模的施工方法
5.
Design and Construction of Fastener-style Steel Pipe Falsework for Cast in Situ Box Girder
现浇箱梁扣件式钢管模板支撑体系的设计与施工
6.
Remove the glove box inner door panel from the glove box outer door panel.
从手套箱外门板上拆下手套箱内门板。
7.
coffin annealing
(钢板的) 装箱退火
8.
Loose plate steel pipe flanges with lapped pipe end for PN 1.0MPa (10 bar)
GB/T9122.2-1988PN1.0MPa(10bar)板式翻边松套钢制管法兰
9.
Loose plate steel pipe flanges with lapped pipe end for PN 0.6MPa (6 bar)
GB/T9122.1-1988PN0.6MPa(6bar)板式翻边松套钢制管法兰
10.
Loose plate steel flanges with copper alloy plate collar for brazing or welding
GB/T15530.5-1995铜合金平焊环松套板式钢法兰
11.
Loose plate steel flanges with copper alloy welding neck collar
GB/T15530.6-1995铜合金对焊环松套板式钢法兰
12.
Design and Construction of Lock-type Steel Boxed Cofferdam in Qingdao Bay Bridge
青岛海湾大桥锁口式钢套箱围堰设计与施工
13.
Analysis of Finite Element Numerical Simulation for Seel Sleeve to Avert Shipping to Dash against Bridge Pier
船舶撞击桥墩防撞钢套箱有限元数值模拟分析
14.
Release the glove box latch and remove the glove box from the glove box module.
松开手套箱锁闩并从手套箱模组拆下手套箱。
15.
Research on Seismic Response of a Top-bear Reinforced Concrete Box Arch Bridge
上承式钢筋混凝土箱板拱桥地震反应分析
16.
Stress Behavior in Embedded Connection Zone of Box Girder with Corrugated Steel Webs
波形钢腹板箱梁嵌入式结合部的应力分布
17.
Stress distribution in anchorage zone between beam and cable for cable-stayed bridge with steel box girder
钢箱梁斜拉桥耳板式索梁锚固结构应力分布
18.
Loose plate steel pipe flanges with welding neck collar with raised face for PN 2.5MPa (25 bar)
GB/T9120.1-1988PN2.5MPa(25bar)凸面对焊环松套板式钢制管法兰