1.
Effect of nano-AlN on performances of low temperature vitrified bond
纳米AlN对低温陶瓷结合剂性能的影响
2.
Effects of nano-AlN on structure and performance of low temperature vitrified bond diamond tools
纳米AlN对低温陶瓷结合剂金刚石磨具结构与性能的影响
3.
Mechanism of lowering the sintering temperature of Al_2O_3 ceramic by the addition of CuO-TiO_2(Ⅰ)
CuO-TiO_2复合助剂低温烧结氧化铝陶瓷的机理(Ⅰ)
4.
Experiment study on AlN ceramics low-temperature sintering aids
氮化铝陶瓷低温烧结助剂体系的研究
5.
Study on Low Melting Point and High Strength Vitrified Bond Superhard Grinding Tools;
低熔高强陶瓷结合剂超硬磨具的研究
6.
Influence of BBSM sintering aid on the properties for PTC thermistor ceramics sintered at low temperature
BBSM烧结助剂对低温烧结PTCR陶瓷性能的影响
7.
Research progress of low-temperature sintering aids of AlN ceramic
低温烧结氮化铝陶瓷烧结助剂的研究进展
8.
Low-Temperature Sintering of ZnNb_2O_6 Ceramics;
ZnNb_2O_6陶瓷的低温烧结研究
9.
LOW FIRING SINTERING OF BaTi_4O_9 DIELECTRIC CERAMICS
BaTi_4O_9介电陶瓷的低温烧结
10.
Low Temperature Sintering of Alumina Ceramics and Crack Healing Reaserch
氧化铝陶瓷低温烧结与裂纹自愈合研究
11.
Investigation on nanosized fuse-promoting adhesives of super low temperature ceramics glaze
陶瓷超低温釉纳米助熔粘接剂的研究
12.
Influence of Additives on Vitrified Bond Melting Temperature of CBN High-speed Grinding Tool
添加剂对CBN高速磨削工具用陶瓷结合剂熔融温度的影响
13.
Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.
性能特点：1.曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成。
14.
The Low-temperature Sintering Densification of 10NiO-NiFe_2O_4 Based Cermet;
10NiO-NiFe_2O_4基金属陶瓷的低温烧结致密化
15.
Study on Properties of PZT-PbO·WO_3 Piezoelectric Ceramics Sintered at Low Temperature;
低温烧结PZT-PbO·WO_3压电陶瓷性能研究
16.
Li_2O-Nb_2O_5-TiO_2 Microwave Dielectric Ceramics and Low Temperature Co-fired Research;
Li_2O-Nb_2O_5-TiO_2微波介质陶瓷及低温烧结研究
17.
Low-termperature Firing BaO-Nd_2O_3-TiO_2 Microwave Dielectric Ceramics;
BaO-Nd_2O_3-TiO_2系统微波介质陶瓷低温烧结
18.
The Low Temperature Sintering of Mg_4Nb_2O_9 Microwave Dielectric Ceramics;
低温烧结Mg_4Nb_2O_9微波介质陶瓷