1.
The Application of Tundish Plug Rod Blowing Argon in Vacuum Pouring of Ingot
中间包塞棒吹氩在钢锭真空浇注中的应用
2.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
3.
The experiments suggest that both bottom and bottom side argon blowing techniques provide better metallurgical effects than top blowing process, obtaining steel quality satisfactory to continuous casting requirements.
结果表明，底侧吹氩和底吹氩工艺的冶金效果均优于顶吹氩工艺，钢水质量均能满足连铸要求。
4.
Argon-blown pocket block is a supportive new and hi-tech product developed simultaneously with bottom-blow argon vent brick.
二、吹氩座砖是与底吹氩透气砖同步开发的配套高新技术产品。
5.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
6.
plication of PLC Control System at the Argon Stand;
PLC控制系统在二钢吹氩站的应用
7.
All full-penetration joints shall be back purged with argon or helium.
所有全熔透焊接接头用氩或氦进行反吹。
8.
Mathematical model of molten steel circulation in ladle with Ar blast
钢包吹氩时钢液循环流动过程数学模型研究
9.
A STUDY ON ARGON-OXYGEN COMBINATION BLOWING PROCESS FOR LOW-CARBON CAST STAINLESS STEEL
氩-氧复合吹炼法生产低碳不锈铸钢的试验研究
10.
Mathematical and Hydromechanical Simulation on Fluid Flow in Argon Blowing Process in Ladle Furnace;
LF吹氩过程中钢液流动的数学物理模拟
11.
The Process Mechanism Analysis and Control Method Research of Steel-Making Bottom Blowing Argon
炼钢底吹氩过程机理分析与控制方法研究
12.
Study on Inclusions Removal by Soft Bubbling in Ladle
钢包软吹氩对钢中非金属夹杂物去除效果研究
13.
Analysis and Improvement of Permeable bricks' rupture for Ladle Bottom Argon Bubbling Purpose
钢包底吹氩透气砖断裂原因分析及改进措施
14.
Influence of Argon Gas injection on Fluid Flow in Slab Continuous Casting Mold
吹氩对板坯连铸结晶器流体流动的影响
15.
Criterion Conditions for Formation of a Single and Double Recirculation Flow Pattern in a Slab Continuous Casting Mold With Argon Blowing
吹氩板坯连铸结晶器内单双循环流的判别条件
16.
Mathematical modelling of erosion of ladle lining with argon blowing at bottom
底吹氩钢包内衬蚀损行为的数值模拟研究
17.
Influence of Bottom Blowing Argon on Nonmetallic Inclusions in Electric Resistance Alloy Cr20Ni35
钢包底吹氩对电热合金Cr20Ni35非金属夹杂物的影响
18.
Prediction model of end point temperature of molten steel in argon blowing station and its simulation application
吹氩站钢水终点温度预报模型及其仿真应用