1.
Microstructures and properties of 7A52 aluminum alloy welded joint by vapor plasma arc welding
7A52铝合金水蒸气等离子弧焊接头组织及性能
2.
Study on the Spectroscopic Diagnosis System of Water Vapor Plasma Arc
水蒸气等离子弧光谱诊断系统的研制
3.
air plasma water injection arc cutting machine
喷水空气等离子弧切机
4.
Behavior Analysis of Low Power YAG Laser-Gas Metal Arc Welding Hybrid Welding Arc Plasma
低功率YAG激光-熔化极气体弧焊复合焊接电弧等离子体行为研究
5.
Analysis on power loss of plasma arc in keyhole plasma arc welding
小孔等离子弧焊的等离子弧功率损失分析
6.
Cutting Stainless Steel by Recompression of Arc with Air Plasma Water
空气等离子水再压缩弧切割不锈钢
7.
Study of Plasma Cloud Sensing of Keyhole Signal in PAW;
等离子弧焊小孔信号的等离子云传感研究
8.
A Simulation of Keyhole Plasma Arc Welding in Aluminium Alloy;
铝合金穿孔型等离子弧焊接过程模拟
9.
STUDY ON FRONT SIDE ARC LIGHT SENSING IN KEYHOLE. MODE PLASMA ARC WELDING
穿孔等离子弧焊正面弧光传感技术研究
10.
The Equipment of Negative Polarity Weak Plasma Arc Overlaying Welding and the Researching of Arc Character
反极性弱等离子弧堆焊设备及电弧特性研究
11.
CLOSE LOOP CONTROL OF WELD PENETRATION IN PULSE PLASMA ARC WELDING
脉冲等离子弧焊接焊透质量的闭环控制
12.
Study on Welding Procedure Digital Control of Micro Plasma arc Welding Machine
微束等离子弧焊机焊接程序数字控制研究
13.
Study on the Technologies of Variable Polarity Plasma Arc (VPPA) and Activating Flux TIG (A-TIG) for Magnesium Alloy Welding;
镁合金变极性等离子弧焊及活性化焊接研究
14.
The study of welding about plasma arc welding in hot battery;
等离子弧焊应用于热电池壳身焊接工艺研究
15.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
16.
Influences of Water Vapor and CO_2 on NO_x Removal by Plasma-facilitated Selective Catalytic Reduction
水蒸气和CO_2对等离子体—催化还原NO_x的影响
17.
Mechanical Properties and Corrosion Behavior of Micro-plasma-argon-arc Welded and Laser Welded Pure Titanium: An Experimental Study;
微束等离子氩弧焊及激光焊用于牙科纯钛焊接的实验研究
18.
The Study in the Problem of Optimum Automatic Regulation about Pulsed Plasma of Argon-Arc Welding
脉冲等离子氩弧焊规范自动调节问题的研究