1.
EFFECT OF HOT ISOSTATIC PRESSING ON INTERFACE CHARACTERISTICS OF URANIUM/ALUMINUM COATING
热等静压处理对U/Al镀层界面特性的影响
2.
EFFECT OF DUAL-PULSES ON Al-Mn ALLOY COATINGS ON IRON ELECTRODEPOSITED WITH A LOW TEMPERATURE MOLTEN SALT BATH
双脉冲镀对低温熔融盐镀Al-Mn合金层的影响
3.
Study on Zn-Al-RE Compound Coating Obtained by Mechanical Plating Process without Crystallization
无结晶形成Zn-Al-RE机械镀合金镀层研究
4.
Coating Structure and Anti-corrosion Mechanism of Hot Dipped 55%Al-Zn Alloy on Sheet Steel
热浸镀55%Al-Zn合金镀层钢板的镀层结构及防腐蚀机理
5.
Study on Corrosion Resistance of Al, Al_2O_3 and Al-Zn Coatings Deposited on Uranium;
金属铀表面Al、Al_2O_3和Al-Zn三种镀层的防腐蚀性能研究
6.
Diffusion Behavior on U-10Mo/Al-Si Alloys
U-10Mo/Al-Si固体扩散行为
7.
Chemical Plating Preparation of Fe/Al Composite Powder and Study on Microstructure of Its Laser Coatings;
Fe包Al粉末的化学镀法制备及其激光熔覆层组织结构研究
8.
Effect of Al Content on Microstructure and performances of Ti_(1-x)Al_xN Coating
Al含量对多弧离子镀Ti_(1-x)Al_xN涂层微观结构及性能的影响
9.
HOT CORROSION BEHAVIOR OF ARC-ION PLATING Ti-Al-Cr(Si,Y) COATINGS ON Ti60 ALLOY
Ti60合金表面电弧离子镀Ti-Al-Cr(Si,Y)防护涂层的热腐蚀行为
10.
HIGH TEMPERATURE OXIDATION BEHAVIORS OF TWO Ni-Co-Cr-Al-Si-Y COATINGS DEPOSITED BY ARC ION PALTING
两种电弧离子镀Ni-Co-Cr-Al-Si-Y涂层的高温氧化行为
11.
Microstructure and shear strength of solder joints of SiC_p/Al composites with Ni plating with Sn-2.5Ag-2.0Ni solder
SnAgNi钎料钎焊Ni镀层SiC_p/Al复合材料的接头微观结构及剪切性能
12.
Cyclic oxidation behavior of arc-ion plating Ti-Al-(Cr) coatings on Ti-60 titanium alloy
Ti-60钛合金电弧离子镀Ti-Al-(Cr)防护涂层的循环氧化行为
13.
Influencing Mechanism of Alloy Elements on Structure and Performance of Zn-Al Hot Dip Coating
合金元素对Zn-Al系热浸镀层结构与性能的影响机理
14.
Application of Combinatorial Materials Approach for Fast Screening of Zn-A1 Alloy Films
组合材料芯片技术应用及Zn-Al合金镀层材料优选
15.
Plating Technology and Properties of Electroless Ni-Mo-P Alloy Coatings
化学镀Ni-Mo-P合金镀工艺及镀层性能
16.
Electrodeposition of Al-Co Coating Layers on Steel in Molten Salt;
钢板熔盐电镀Al-Co合金的研究
17.
Study on Al-Ti and Al-Ti-Ce Infiltrated Layers on Martensitic Valve Steel
气阀钢表面Al-Ti及Al-Ti-Ce共渗层研究
18.
Mass Calculation of coating (For equal coating)/MM
锌镀层质量(两个相同锌镀层厚度)