1.
Analyses of the Constant Shear Strain Point and Velocity Distribution in the Shear Band for Geomaterials
地质体材料剪切带内部的常剪切应变点及速度分布分析
2.
Skipping an irregular paint application, usually occurring when improper contact is made between the applicator roll and the strip. See also starving out.
剪切—剪切还发生在辊与辊接触点。剪切通常还指金属剪切设备。
3.
strain controlled direct shear apparatus
应变控制式直接剪切仪
4.
uniform strain shearing strengh tester
等应变剪切强度测试仪
5.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
6.
Analysis of Shear Deflection of Flat Steel Box Girder of Cable-Stayed Bridge;
斜拉桥扁平钢箱梁剪切变形效应分析
7.
New Method for Calculating Local Shear Strain in Adiabatic Shear Band of Titanium Alloy
钛合金绝热剪切带的局部剪切应变估算的新方法
8.
The only strain is a shear strain and the dilatation is zero, these waves are called shear waves.
唯一的应变是剪应变而没有膨胀，这种波叫剪切波。
9.
The Study on Shear Creep Model of Wall Rock of Long, Great and Deep Buried Tunnel;
长大深埋隧洞围岩非定常剪切蠕变模型初探
10.
The rock group is characterized by a general order but internal disorder because of intense ductile shearing deformation.
其特点是整体有序，组内无序，韧性剪切变形强烈。
11.
Studies on the Effect of the Deformation of Panel Zones on the Steel Rigid Frames Response;
钢框架节点域剪切变形对框架位移角的影响
12.
Finite Element Analysis on Shear Deformation of Panel Zone of Steel Frames
考虑节点域剪切变形的钢框架有限元分析
13.
Cyclic Stress History Effects on Small-strain Shear Modulus of Silt;
循环应力历史对粉土小应变剪切模量的影响
14.
Effect of stress path circumgyration on shear modulus under small strain
小应变条件下应力路径旋转对剪切模量影响
15.
Theoretical Analysis of the Adiabatic Shear Band Width and Strain Rate Effect of Ti-6Al-4V
Ti-6Al-4V绝热剪切带的厚度及应变率效应研究
16.
The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress.
残余应变是由于周期剪切引起孔隙压力增长,在初始剪力作用下产生的附加的剪应变.
17.
Experimental study on shearing deformation behavior of saturated clay under cyclic stress
循环应力下饱和黏土剪切变形特性试验研究
18.
Research on the Prediction for Shear Yield Stress of Electrorheological Fluids;
电流变液剪切屈服应力预测的理论研究