1.
Study of shear experiment of solid propellant with alterable directions
固体推进剂的变角剪切力学试验研究
2.
Rectangle blade with four functional cutting edges is very durable.
◆ 剪切角可调，减少板料扭曲变形。
3.
The Relationship between the Average Shear Angle in Vibration Cutting and the Shear Angle in Conventional Cutting
振动切削平均剪切角和普通切削剪切角的关系
4.
Studies on the Effect of the Deformation of Panel Zones on the Steel Rigid Frames Response;
钢框架节点域剪切变形对框架位移角的影响
5.
The shear of woven fabrics results largely in the alteration in the angle between warp and weft yarn.
机织物的剪切作用，大部分由经纱和纬纱之间角度的改变所形成。
6.
The Study on Preparation of Al_2O_(3sf)/AZ91D Composite and Equal Channel Angular Pressing Shear Deformation;
Al_2O_（3sf）/AZ91D复合材料制备及其等径角挤剪切变形研究
7.
excision repair deficient mutant
剪切修复缺失突变型
8.
strain controlled direct shear apparatus
应变控制式直接剪切仪
9.
uniform strain shearing strengh tester
等应变剪切强度测试仪
10.
Design and Manufacture for Strong Shear Rheometer and Experimental Study of Shear Flow Cavitation;
强剪切流变仪的研制及剪切空化的实验研究
11.
Expression for Pure Shear by the Euler Angles
纯剪切应力状态的Euler角表示
12.
Test on shear band inclination angles in cohesive soils under axisymmetric conditions
轴对称状态下粘性土剪切带倾角试验
13.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
14.
Using Shear Invariant and Recursive Cycle Spinning for Image Denoising in Contourlet Domain
基于剪切不变的递归Contourlet变换图像去噪
15.
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
16.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
17.
Influence of Shear Lag and Shear Deformation on the Vibration of Thin-Wall Box-Girder
剪力滞后剪切变形对薄壁箱梁的振动影响
18.
Analyses of the Constant Shear Strain Point and Velocity Distribution in the Shear Band for Geomaterials
地质体材料剪切带内部的常剪切应变点及速度分布分析