1.
The Interaction of Circular Cavity, Inclusion with Beeline Cracks by SH-wave;
SH波作用下孔洞、夹杂与直线形裂纹的相互作用
2.
develop a fine network of cracks.
形成一个网状的裂纹。
3.
die C tear strength
撕裂强度（直角形）
4.
Integral Transform Technique for the Stationary and Dynamic Collinear Cracks Problem in a Piezoelectric Strip;
积分变换方法求解压电带形中静止或运动的共线裂纹问题
5.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
6.
Resarch on crack preventing on-line in 40GrNiMo specimen with edge crack and its microstructure analysis
40GrNiMo试件单边裂纹在线止裂及组织分析
7.
The formation of cracks on the surface of paint layers.
油画层皱裂油画表层裂纹的形成
8.
rectilinear screw-thread reluctance motor
直线螺纹磁阻电动机
9.
double generator of a ruled surface
直纹曲面的二重母线
10.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
11.
Detection of Notch Crack Initiation and Propagation by DC Potential Drop Method
缺口裂纹起裂和扩展检测的直流电位法
12.
Research of Crack Growth Life for Certain Helicopter's Main Blade
某型直升机主桨叶裂纹扩展寿命研究
13.
To arrange in or form a line.
排成直线，形成直线
14.
The method of hypersingular integral equation is applied to the calculation of the stress intensity factor at the front of a rectangular crack which is vertical to a bimaterial interface and loaded by interior normal pressure.
使用超奇异积分方程方法，对双材料空间中垂直于界面的矩形裂纹Ⅰ型问题进行了研究。
15.
Cracks, growing at weld toe, tend to form at numerous sites along the transverse width perpendicular to the applied stresses.
焊趾处萌生的裂纹往往在垂直于作用应力方向沿着横向宽度在多处形成。
16.
spiral contrapper knitting machine
螺旋形花纹吊线织袜机
17.
The smaller the curvature and the larger the crack length the smaller will be the fracture stress.
曲线半径越小，裂纹长度越大，断裂应力也就越低。
18.
The analysis of cracking in steel bridges can usually be accomplished by using linearelastic fracture mechanics.
通常可用线弹性断裂力学进行钢桥裂纹分析。