1.
Quasi-static compression behaviors of cylindrical tubes filled with open-cell aluminum foam
开孔泡沫铝填充圆管的准静态压缩行为
2.
Studies on the axial dynamical buckling and energy-absorption properties of aluminum foam-filled circular tubes
泡沫铝填充圆管轴向动力屈曲及吸能特性研究
3.
Experimental study on a plastic deformation energy absorber filled with aluminum foam in a thin-walled metal tube
泡沫铝填充薄壁金属管塑性变形缓冲器吸能特性的试验研究
4.
Energy-absorption Properties of Foam-filled Part Thin Shell Subjected to Bending
泡沫铝部分填充薄壁梁弯曲吸能特性研究
5.
First, the axial compression tests of the empty hat sections, aluminum foam and the aluminum foam filled hat sections are carried out;
首先,进行了泡沫铝空心帽型结构以及泡沫铝填充帽型结构的轴向压缩试验;
6.
Preparation with Aluminum Foam of Sandwich Beams and Sandwich Tubes and the Study of Mechanical Property;
泡沫铝层合梁、层合圆管的制备和力学性能研究
7.
Investigation into Influences of Filling Formats of Foam Material Filled Steel Tubes on Component Damping Property
填充方式对泡沫材料填充钢管构件阻尼性能影响的研究
8.
EXPERIMENTAL STUDIES ON THE AXIAL CRUSHING BEHAVIORS OF ALUMINIUM FOAM-FILLED HAT SECTIONS
泡沫铝填充帽型结构轴向压缩吸能特性的试验研究
9.
Research on the Energy Absorption of Foam Aluminum with Silicone Rubber and the Bending Capability of Foam Aluminum Sandwich Beams;
硅橡胶填充泡沫铝吸能性能和层合梁抗弯性能研究
10.
Influence of Alloying, Pore Structure and Filler on the Compressive Behavior of the Open-Cell Aluminum Foams;
合金化与孔结构及填充物对泡沫铝压缩行为的影响
11.
Fabrication of SiC Particle-Reinforced Aluminum Foam Cylinder Sandwich and the Study of Its Mechanical Property;
碳化硅增强泡沫铝层合圆管的制备及其力学性能研究
12.
The Shape Optimization of Double-Arch Spatial Structure and the Research of Component with Foam Metal Materials;
双拱空间钢管结构体型优化及泡沫填充构件研究
13.
Behavior Analysis of Isolation Trenches Filled by Foamed Plastic & Cement Clay
泡沫塑料-水泥土充填沟隔振性状研究
14.
Theoretical Study on Partial-stability of Foam-filled Thin-walled Hulls;
填充泡沫舟体结构局部稳定理论研究
15.
Quasi-static axial compression tests are carried out to study the crushing behaviors of the aluminum foam filled hat sections.
通过试验方法研究了泡沫铝填充帽型结构准静态压溃时的吸能特性。
16.
Indentation Property of Closed-cell Aluminum Foam under the Flat-end Cylindrical Indenter
闭孔泡沫铝在圆柱形平压头下的压痕性能
17.
Numerical Simulation of Beads Filling Process in Lost Foam Casting;
消失模铸造泡沫珠粒充填过程数值模拟
18.
CONVECTIVE HEAT TRANSFER IN TORTUOUS HEAT RADIATOR FILLED WITH OPEN-CELL COPPER FOAM
泡沫铜填充曲折槽道散热器内对流换热研究