1.
Numerical simulation of gas-particle two phase flow in hydroxyapatite powder spraying process
羟基磷灰石粉体喷涂气固两相流数值模拟
2.
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder.
粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
3.
Composite coating protection technology of arc spraying and powder coating spraying
电弧喷涂与粉末涂料喷涂复合涂层防护技术
4.
Preparation of Ni-coated Superfine WC Composite Material
热喷涂用镍包裹超细碳化钨复合粉体的制备
5.
Study on the Technology of Reaction Synthesis Arc Spraying to Making Al_2O_3 Millimicron Particle;
反应合成电弧喷涂制备Al_2O_3纳米粉体技术的研究
6.
Numerical Simulation of Nanostructured Agglomerated Powder Melting Process during Plasma Spraying
等离子喷涂纳米团聚体粉末熔化过程数值模拟
7.
Metallic powder material nickel-based alloy powder for spraying
GB/T8548-1987镍基喷涂合金粉
8.
Process Control of Pretreatment before Spraying Powder Paint on Aluminum Profiles
铝型材喷涂粉末涂料前处理工艺控制
9.
Powder flame spray and spray fusig gun,with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder.
粉末火焰喷涂喷焊设备，配有各种粉末喷嘴，能喷涂金属微细粉末和氧化物涂层。
10.
Microstucture and Properties of Coatings Produced by Detonation Spraying of Mechanical Activating Treated Composite Powder
机械活化复合粉末爆炸喷涂的涂层组织和性能
11.
Study on Arc-Sprayed Cored Wires and Wear Properties of Coatings;
电弧喷涂粉芯丝材及其涂层的磨损特性研究
12.
Performance of the Arc Spraying Coatings with Core Wires Used on the CFB Boiler's Water-cooled Wall;
流化床锅炉水冷壁粉芯丝材电弧喷涂涂层性能
13.
Technology and Property of Composite Coating by ARC Spraying Feeding from Outside
外送粉电弧喷涂复合涂层工艺与性能的研究
14.
Properties of APS alumina coating with different alumina particle distributions as feedstock
不同氧化铝粉末等离子喷涂氧化铝涂层的性能
15.
WC-10%Co4%Cr Coatings Prepared by Different Feedstocks
不同粉末超音速火焰喷涂WC-10%Co4%Cr涂层的性能
16.
Discussing on the Factors Effecting Luster of Powder Coating Films
影响粉末涂料静电喷涂光泽因素的研究
17.
Study on Preparation of Arc Sprayed Zn-Al-Mg-RE Cored Wire and the Coating
电弧喷涂Zn-Al-Mg-RE粉芯丝材及其涂层的制备
18.
Discussion on the Factors Affecting Leveling of Powder Coatings for Aluminum Alloy Profile
铝型材喷涂粉末涂料流平性因素的探讨