1.
Selection of Driven Type and Motor of Roller Table in Hot Rolling Mill
热轧厂运输辊道传动及电机选型的研究与应用
2.
Simulation and Analysis on Driving Shaft in Float Glass Roller Annealing Lehr Based on FEA Method
基于有限元法的浮法玻璃退火窑辊道传动轴受力仿真分析
3.
Ceramic rollers are used in various types of roller kilns as an essential component for supporting and transporting semi-finished products fired at high temperature.
陶瓷辊棒是现代陶瓷工业辊道窑必不可缺的关键部件，它在高温烧成中起承载传动产品作用。
4.
Demonstration of the Static and Dynamic Balance of the Roller in Heavy-duty Roller
重型轧机辊道辊静动平衡优化工艺论证
5.
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
6.
W11 series synmmetric turn-up form three roll bendling machine, resing and flalling the up-roller of which all adot mechanical power drive.
w11 系列对称上调式三辊卷板机，上辊升降和两下辊旋转，均采用机械传动。
7.
The device is insensitive to the vibration of a strip or sheets while moving along the roller.
对带或板材沿辊道运动时的振动不敏感。
8.
Study on the calculation of transmission torque of straightener based on coupling between rollers
基于辊间耦合的矫直机传动扭矩计算方法研究
9.
Non-linear twist vibration of main transmission system of vertical rolling mill
立辊轧机主传动系统的扭振非线性分析
10.
Analysis of the Axial Force of Roll and Torsion Vibration of Main Drive System of Plate Mill
中厚板轧机轧辊轴向力及主传动扭振分析
11.
Application of Thickener Driven by Peripheral Rollers in Dexing Copper Mine
周边辊轮传动浓缩机在德兴铜矿的应用实践
12.
Force Analysis of Variable Shaft Distance and Equal Angular Velocity Ratio Transmission Mechanism of a Roller Breaker
辊式破碎机变轴距等速比传动机构的力分析
13.
Nonlinear Twist Vibration of Main Transmission System of Vertical Medium Plate Mill
中厚板立辊轧机主传动系统的非线性扭振
14.
On the roller with VVVF three-phase asynchronous motor design
浅谈辊道用变频调速三相异步电动机的设计
15.
SIMULATION ON AIRFLOW CHARACTERISTIC IN SPLAT COOLING SECTION OF ROLLER HEARTH KILN
建陶辊道窑急冷段内气体流动特征模拟研究
16.
The main press-cut roller adopts universal shaft driving. It can guarantee the knives' service life and make driving fast.
主要压切辊采用万向轴传动，刀具寿命保证，传动轻快。
17.
The main press-cut rollers adopt universal shaft driving. It can guarantee the knives' service life and make driving fast.
主要压切辊均采用万向轴传动，刀具寿命保证，传动轻快。
18.
Direct drive to the rolls with heavy-duty helical bevel gears where the output shaft is directly coupled to the roll shaft.
高坚固的螺旋斜线轴承直接驱动辊筒。输出轴直接连接辊轴，中间没有任何传动消耗。