1.
Math Model for Deformation Resistance of Cast Bloom of Spring Steel 55CrSi
弹簧钢55CrSi连铸坯变形抗力数学模型
2.
Studies on Shell Deformation in H～2 Mould of FTSC Thin Slab Caster;
FTSC薄板坯连铸机H～2型结晶器内坯壳变形过程的研究
3.
Study of Solidification Process and Shape Defection Control of Electromagnetic Casting Aluminum Slabs;
电磁铸造铝板坯的凝固过程和变形控制研究
4.
Numerical Analysis of Casting Deformation in Case Shell on Aeroengine
关于机匣类部件铸造毛坯变形的数值分析
5.
THE INFLUENCE OF STRUCTURE AND CLASSIFIED NUMBER OF BACKUP GUIDE ROLLS IN CCM ON THE DEFORMATION OF SLAB BULGE
连铸机支承导辊结构及分节数对铸坯鼓肚变形的影响
6.
Therefore the deformation, strain, stress and the force of the roller on the slab are obtained for each stage of the casting.
由此得出了铸坯在各个阶段的变形、力及辊子对铸坯的夹持力、直力矩等。
7.
Continuous casting mould hydraulic vibration devices of square billet(round billet)/rectangular billet
大方坯(圆坯)/矩形坯连铸结晶器液压振动装置
8.
Optimization of secondary cooling scheme of combined caster
方/板坯连铸机浇铸矩形坯二冷制度优化
9.
Study on Solidified Shell Thickness Measurement and the Solidified Shell Shape of Slab
连铸板坯坯壳厚度测定及凝固壳形貌模拟研究
10.
The Relationship Between the Gap Accuracy of Fan-shaped Roll with Quality Slab in the thin Slab Caster
中薄板坯连铸机的扇形段辊缝精度与铸坯质量的关系
11.
Formation and Control of Oscillation Mark for 304 Stainless Steel Continuous Casting Slab
304不锈钢连铸板坯振痕形成及控制
12.
QUALITY PROBLEMS AND COUNTERMEASURES FOR NEAR-NET-SHAPE CC OF BEAM BLANKS
近终形连铸异型坯的质量问题及对策
13.
Design of Cavity Shape for a New Thin Slab Continuous Casting Mold
新型薄板坯连铸结晶器内腔形状设计
14.
Mechanism of Crack Formation During Continuous Casting of Peritectic Steel Slabs
包晶钢铸坯裂纹形成机理的实验研究
15.
Trial on production of GCr15 steel by converter-rectangular bloom caster route
转炉矩形坯连铸生产GCr15钢的试验
16.
Effect of slab strain on Nb(C,N) precipitation in continuous casting process
连铸过程铸坯应变对碳氮化铌析出行为的影响
17.
A Fundamental Study on Net-shape Hot-pressing of Mg Cast Perform;
镁合金预成形铸坯模压成形技术基础研究
18.
Framework Installation and Parameters Adjustment of Fan-Shaped Billet Continuous Casting Equipment
异形坯连铸扇形段框架的组装及参数调整