1.
Dissolution and precipitation of carbide in hot-rolled Inconel alloy 690
热轧态Inconel690合金中碳化物的溶解和析出
2.
Study on Structure Features and Mechanical Properties of 08Al Hot Rolled Narrow Strip
窄钢带08Al热轧态的组织特征及其力学性能研究
3.
Structure Characteristics of 0.02C-12Cr Hot-rolled Stainless Steel Plate and Its Influence
0.02C-12Cr不锈钢板材热轧态的组织特征及其影响
4.
The alloys occur ductile fracture after annealing.
合金热轧态呈脆性准解理断裂,退火后转变为韧性断裂。
5.
Research on Microstructure Characteristics and Its Effects on Performance of Hot-rolled Ferritic Stainless Steels
铁素体不锈钢热轧态组织特征及其对性能影响研究
6.
Precise Calculation of Plate Transient Temperature Field in Finish Rolling Process of Hot Tandem Rolling
热连轧精轧过程中带材瞬态温度场的精确计算
7.
Effect of MinimTitanium on Dynamic Transformation of Undercooled Austenite of Hot Rolled Steel Containing Vanadium
微量钛对热轧含钒钢动态相变的影响
8.
EXPERIMENT STUDY ON THE SYSTEM OF LIQUID SLAG EXHAUST OF HEATING FURNACE No.4 IN HOT MILL WISCO
武钢热轧厂4号加热炉液态出渣的试验研究
9.
Application of the Monitoring System of Fans in Pangang Hot-Roll-Strip Factory;
风机在线状态监测系统在攀钢热轧板厂的应用
10.
Eco-Rebar-On the R&D of hot rolled rebar with high strength grade
生态钢筋对高级别热轧带肋钢筋研发的思考
11.
FEM simulation of hot rolling process in the second pass considering dynamic recrystallization in the first pass
考虑一道次动态再结晶的二道次热轧仿真
12.
EFFECT OF Ce ON THE DYNAMIC RECRYSTALLIZATION AND TEXTURE OF AZ31 MAGNESIUM ALLOY DURING HOT ROLLING
Ce对热轧AZ31镁合金动态再结晶及织构的影响
13.
Modal Parameter Testing of Roller Gap Sensor Structure on Hot Rolling Mill
热连轧机位移传感器结构的试验模态分析
14.
Microstructure and mechanical properties of hot rolled C-Mn-Si TRIP steel based on dynamic transformation
基于动态相变热轧C-Mn-Si系TRIP钢的组织及性能
15.
Microstructure Control of Hot Rolled C-Si-Mn TRIP Steel Based on Dynamic Transformation of Undercooled Austenite
基于动态相变的C-Si-Mn系热轧相变诱导塑性钢
16.
Effect of Austenite Condition on Hot-rolled Nb-microalloyed TRIP Steel Based on Dynamic Transformation
奥氏体状态对基于动态相变的热轧含铌TRIP钢组织控制的影响
17.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
18.
Flying shears control model for 1580mm hot strip mill in the Third Hot Rolling Plant of WISCO
武钢三热轧1580mm热连轧机飞剪控制模型