1.
Analysis of Array Antenna Pattern Amplitude in Uniform and Taper Distribution
阵列天线幅度均匀分布和锥削分布方向图分析
2.
Aerodynamic analysis for a reentry vehicle with slice-flaps
带控制舵钝双锥削面体的气动特性研究
3.
Research on Grinding the Convexity of Taper Roller Conical Surface Lines via Centerless Grinder
无心磨床磨削圆锥滚子圆锥面素线凸度的研究
4.
Processing Method of Screw for Conical Twin-screw Extruder
锥形双螺杆削挤出机螺杆的加工方法
5.
Vibration-prevention Lathing Process for Long Shaft Circumference of Tapered Spiral Blades
锥形螺旋叶片长轴外圆防振车削工艺
6.
Analysis on Working Angle of Scraping Cutter for Bevel Gear with Circular Arc Teeth
弧齿锥齿轮刮削刀盘工作角度的分析(上)
7.
Tooth Contact Analysis and Cutting Parameters Modification of Small-modulus Spiral Bevel Gears;
小模数弧齿锥齿轮的接触分析与切削参数修正
8.
Discussing based on cutting method of conical cylinder with plane arc axes;
平面大圆弧轴线圆锥柱体切削机理研讨
9.
Research on Generation Mechanism and Correction Technique for Spiral Bevel Gear's Grinding Errors
螺旋锥齿轮磨削误差产生机制及修正技术研究
10.
Analyzation and application of turning method for tapered roller bearing inner ring raceway
圆锥滚子轴承内圈滚道车削方法的分析及应用
11.
Research on Surface Roughness for Multi-axis NC Grinding of Spiral Bevel Gear
多轴数控磨削螺旋锥齿轮的表面粗糙度研究
12.
Based on NC Turning Screw Cone Programming Method
基于数控车削的圆锥螺纹编程方法研究
13.
Research on Surface Roughness for Multi-Axis NC Grinding of Bevel Gearr
螺旋锥齿轮数控磨削表面粗糙度的建模与分析
14.
The Optimized Design and Reshaping of Profile of Skiving Cutter with Plane Flank for Gleason Gear;
弧齿锥齿轮尖齿刮削刀盘的齿形优化设计与重磨
15.
Surface Roughness Forecasting of Spiral Bevel Gear Based on Artificial Neural Network
基于人工神经网络的螺旋锥齿轮磨削加工表面粗糙度预测
16.
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters.
该机可用于磨削各类形似半圆角或反锥角的高速钢和硬质合金雕刻刀具和单边或多边刀具。
17.
The metering rod either has two or more steps of different diameters or is tapered at its lower end.
量油杆可以有两个或更多个不同直径的台阶，或在它的下端被逐渐削成锥形。
18.
"Suitable corrective measures must be taken to remove these obstructions, such as taper boring the pipe or installing a spacer."
这是就要进行必要的矫正,例如对管道口进行锥形切削,或安装隔离垫圈,以消除这些障碍。