1.
Influence of groove pressing mode on microstructure of H62 brass after the groove pressing
形变方式对模压形变H62黄铜组织的影响
2.
The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle
圆杆端部在倾斜压模间的塑性变形力
3.
FLAC Simulation and Research of Earth Surface Deformation during Hydraulic Fracturing
水力压裂地表变形的FLAC模拟研究
4.
Finite Element Simulation of the Thin-wall Hydraulic Cylinder's Clamping Deformation
薄壁液压缸筒夹紧变形的有限元模拟
5.
Research on the Thermal Simulation Experiment of Compress Deformation of AZ80 Magnesium Alloy
AZ80镁合金热模拟压缩变形的实验研究
6.
Research on compression strength and modulus of deformation of cemented soil
水泥土抗压强度和变形模量试验研究
7.
Numerical Simulation and Experiments on Bending Vibration Characteristics of Circular Piezoelectric Vibrator
圆形压电振子弯曲变形数值模拟与实验
8.
Estimation of the Deformation-Modulus in Sandy Soils by the Shear-Modulus of pressuremeter Test
用旁压剪切模量推算砂性土地基的变形模量
9.
Research of Deformation Monitoring of RCC Dam Based on Coefficient of Entropy and Fuzzy Matter-element Model
碾压混凝土坝变形监测熵权模糊物元模型研究
10.
Polyamide Has Solved the Problem of Embrittlement and Deformation on Drop Hammer Die Moulding Surface
聚酰胺解决了落压模型面的脆裂变形问题
11.
Numerical Simulations of Structural Deformations under Compressive Stress;
挤压应力作用下的构造变形数值模拟研究
12.
Numerical Simulation on Wedge Deformation of Spray-deposited 5A06 Aluminum Alloy;
喷射沉积5A06铝合金楔压变形的数值模拟
13.
Fea of Stress and Deflection in Dies of Tube Hydroforming;
内高压模具应力和变形规律有限元分析
14.
Analysis on Large Deformation of Surrounding Rock Mass Squeezed by High Ground Stress;
高地应力围岩挤压性大变形分析及数值模拟
15.
Numerical Simulation of Velocity Field and Deformed Parameter While Pushing Tubular Object;
管材件挤压时速度场和变形参数的数值模拟
16.
Numerical Simulation on Surface Deflection of Doublecurved Shallow Shell by Viscous Pressure Forming
粘性介质压力成形双曲扁壳面畸变的数值模拟
17.
Structural Optimization Design of Cold Extrusion Die Based on Small Elastic-plastic Deformation
基于小弹塑性变形的冷挤压凹模结构优化设计
18.
FEM Simulation for Soft Reduction in Rectangular Bloom Continuous Casting
矩形坯轻压下过程应力应变分布的有限元模拟