1.
Experimental study on an organic-metal soldering flux with lead-free and low temperature for aluminum soldering
有机金属型铝用无铅低温软钎剂的试验
2.
eutectic brazing alloy
低共熔点软钎焊合金
3.
Brazing of SiC Ceramic to GH783 Low Expansion Superalloy
SiC陶瓷与低膨胀高温合金GH783的钎焊
4.
The Software Designing and Realizing of Liquid Level Detecting System;
低温推进剂液位检测系统软件设计与实现
5.
Investigation on Microstructure and Properties of Low Silver-Containing Cadmium-Free Intermediate Temperature Brazing Filler Metals;
新型低银无镉中温钎料组织性能的研究
6.
Microstructures and mechanical properties of Sn-30Bi-0.5Cu low-temperature lead-free solder
Sn-30Bi-0.5Cu低温无铅钎料的微观组织及其力学性能
7.
Research status and development trend of middle temperature fluoaluminate flux
中温氟铝酸盐铝钎剂的研究现状和发展趋势
8.
COOLANT TEMPERATURE BELOW NORMAL
冷却剂温度低于正常值
9.
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
10.
Propellant inlet temperature control for cryogenic rocket engine tests
低温发动机试验推进剂入口温度控制
11.
The Research of Supported Gold Catalysts for the Oxidation of Low-concentration Benzene at Low Temperature;
低浓度苯低温净化用金催化剂的研究
12.
The Manufacturing of Filler Metal and the Joining of TiAl Alloys;
TiAl基合金高温钎焊钎料配制及连接工艺研究
13.
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
14.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
15.
Effects of different fluxes on the characteristics of Sn-Zn solders
不同钎剂对Sn-Zn系无铅钎料润湿特性的影响
16.
Rubber and plastics hoses--Subambient temperature flexibility tests
GB/T5564-1994橡胶、塑料软管低温曲挠试验
17.
Use a soft cloth lightly moistened with a mild detergent solution.
用软布片沾温和的清洁剂擦拭。
18.
Experiment study on AlN ceramics low-temperature sintering aids
氮化铝陶瓷低温烧结助剂体系的研究