1.
Study on Eliminating Forging Accessorial Block of the Continuous Grain Flow Crankshaft Which Forming in the RR-equipment
全纤维曲轴RR镦锻消除锻造余块的工艺探索
2.
FEM Simulation of RR Method Bend-Upset Forging of Heavy Crankshaft;
大型曲轴RR法弯曲镦锻成形有限元模拟
3.
Comparative Analysis and Research of RR, TR and NTR Upset-Bending Processes for Heavy Crankshaft of Continuous Grain Flow;
曲轴全纤维弯曲镦锻成形技术RR法、TR法、NTR法对比研究
4.
transfer header
连续自动式凸缘件镦锻机
5.
Research on the Upset Forging Technology of Marine Crank of 305 Crankshaft
船用305曲轴曲拐镦锻成形工艺研究
6.
Research on local upsetting finish forging process of valve blank
气门毛坯局部镦挤终锻成形工艺研究
7.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
8.
Development and application of a CAD/CAE system for the TR forging die for crankshaft
曲轴TR镦锻模具CAD/CAE系统开发与应用
9.
Failure analysis of upset-bending equipment for a heavy crankshaft with continuous grain flow
大型全纤维曲轴TR镦锻装置失效分析
10.
The Method of Upsetting Short Steel Ring in Hot State for Measuring the Blow Energy of Hammer
用钢质短圆环热镦粗法测定锻锤打击能量
11.
Process Research and Numerical Simulation for Upsetting Forming on the End of the Oil Tube;
油管端部镦锻成形工艺研究及其数值模拟
12.
The Design and Analysis of a New Structure Full-Fiber Crankshaf Upsetting-Bending Hydraulic Press
全纤维曲轴弯曲镦锻液压机新结构设计及分析
13.
In this paper,an extrusion-forging process for a knuckle of Benz heavy truck is introduced,which includes four steps: Upsetting,extrusion,pre-forging and forging.
奔驰重型卡车的转向节挤压锻造工艺,分为镦粗、挤压、预锻和终锻4个工步。
14.
Research on Evolution of Void Defects in Heavy Forgings during Upsetting Process
大锻件镦粗成形中内部空洞型缺陷的演化规律研究
15.
Analysis of TR Upset-Bending Process and Equipment Optimization for Heavy Crankshaft with Continuous Grain Flow
大型全纤维曲轴TR镦锻成形分析及装置结构优化
16.
New technology and essentials in die design for upsetting drill key on a universal press was introduced. Then a practical die construction was presented.
介绍了在通用冲床上镦锻钻头钥匙的新工艺和模具设计要点 ,并给出了实用的模具结构
17.
Mechanism of rr Groups Evolved from Non-Isolated RR Groups Based on Fitness
基于适合度的不隔离RR群体演变成rr群体的机理研究
18.
double-stroke solid-die automatic cold header
双击整模自动冷镦机