1.
Cold Extrusion Process and Die Design of Cups with Bosses
圆形凸台件的冷挤压工艺及模具设计
2.
Approximation Calculation of Drawing Technology of Flange Cylindrical Parts
有凸缘圆筒形件的拉深工艺计算分析
3.
Study on Warm Precision Forging of Spur Gears with Big Modulus and High Boss
大模数高凸台圆柱直齿轮温精密成形技术研究
4.
Research on cold forging of spur gears with high boss based on uniform thinking
基于均衡思想高凸台圆柱直齿轮冷锻成形
5.
DETERMING THE MINIMAL RADIUS OF BASE CIRCLE OF A CAM WITH TRANSLETINGA POINT FOLLOWER ACCORING TO THE ALLOWABLE PRESSURE ANGLE[α]
按许用压力角(α)确定直动从动件盘形凸轮机构凸轮最小基圆半径
6.
Design for a new type of cam mechanisms-disk cam mechanism with concave arc follower(一)
一种新型凸轮机构——凹圆弧底从动件盘形凸轮机构的设计(一)
7.
Derivation of pressure angle formula for disk cam mechanism with convex arc bottomed follower
凸圆弧底从动件盘形凸轮机构压力角公式的推导
8.
Study on Optimization of Blank Corner Dimensions of Shallow Square Boxes Without Flanges;
无凸缘低盒形件圆角区毛坯尺寸优化的研究
9.
A sapphire that was cut cabochon.
切削成凸圆形的蓝宝石
10.
This paper deals with warm precision forging of accurate spur gears with big modulus and high boss.
本文所研究的是大模数高凸台圆柱直齿轮的温精密成形技术。
11.
The spur gears with big modulus and high boss are critical parts in the automobile industry.
大模数高凸台圆柱直齿轮是汽车工业上有特殊意义的零件。
12.
an oval or round dormer window.
一种椭圆形或是圆形的凸肚窗。
13.
The radius of a circle described by a crank, cam, or similar machine part.
(曲轴的)半径曲柄、凸轮或类似机器部件形成的圆的半径
14.
<title>Minimum dimension design of disc cam mechanism with upright installed concave arc bottomed translating follower
正置式凹圆弧底直动从动件盘形凸轮机构的最小尺寸设计
15.
A chisel with a rounded, troughlike blade.
半圆凿带有凹凸横截面的圆形的凿子
16.
Scattering of SH-Wave by Semi Cylindrical Hill Above Subsurface Cavity;
浅埋圆孔附近的半圆形凸起地形对SH波的散射
17.
On the Scattering of SH-Wave by Semi-Cylindrical Hill with Lining Structure;
含圆形衬砌结构的半圆形凸起对SH波的散射
18.
A bulging or rounded projection or swelling.
隆凸，圆枕一块脓包或圆形的突起或肿胀