1.
Stainless steel fasteners provided throughout assembly.
在装配的全过程中，均采用不锈钢紧固件。
2.
Analysis and Protection of Galvanic Corrosion on Austenitic Stainless Steel Fasteners
奥氏体不锈钢紧固件电偶腐蚀原因分析与防护
3.
All the fastening pieces are made of stainless steel.
所有的紧固件均采用不锈钢制作。
4.
All the fastening pieces are adopted the stainless steel screw.
所有的紧固件都采用不锈钢螺钉。
5.
Service of check valve components shall be through a single stainless steel access cover secured with stainless steel bolts.
维修止回阀部件应该通过唯一的用不锈钢螺栓紧固的不锈钢检修盖进入进行。
6.
" Mechanical properties of fasteners--Stainless steel bolts,screws, studs and nuts"
"GB/T3098.6-1986紧固件机械性能不锈钢螺栓,螺钉,螺柱和螺母"
7.
All the leakage fixers adopt stainless steel, the sealers adopt silicon rubber, which can withstand oil, acid alkalis, and high temperature.
所有外露紧固件均采用不锈钢，密封件采用硅橡胶，耐油、耐酸、耐碱、耐高温。
8.
All the leakage fixers AC adopt stainless steel, sealers adopt silicon rubber, they can withstand oil, acid alkalis, high temperature.
所有外露紧固件均用不锈钢，密封件采用硅橡胶，耐油、耐酸、耐碱、耐高温。
9.
Study on the Liquid Solid Diffusion Bonding of Low Carbon Steel/Stainless Steel
碳钢/不锈钢液固相扩散复合的研究
10.
Gangding, fastenings manufacturing, steel wiredrawing processing.
钢钉、紧固件制造、钢材拉丝加工。
11.
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固，应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
12.
Stainless Steel/Stainless Steel Countersunk
不锈钢/不锈钢 沉头型
13.
Stainless Steel/Stainless Steel Standard
不锈钢/不锈钢 标准型
14.
Stainless Steel/Stainless Steel Dome Head
不锈钢/不锈钢 圆头型
15.
Specification for welding of stainless steel clad steel plate
GB/T13148-1991不锈钢复合钢板焊接技术条件
16.
Microstructure and Solidification Mode of Welding Joint of Cr15Mn9Ni1N Stainless Steel
Cr15Mn9Ni1N不锈钢焊接接头的组织及凝固模式
17.
The Technical Study of 2205 Duplex Stainless Steel Solid Solution Treatment
2205双相不锈钢固溶处理工艺研究
18.
Stainless Steel/Steel Dome Head
不锈钢/钢 圆头型