1.
Experiment Study on Spinning Trail of Pipe in Integral Mandrel-less Roller
整体无心轴托辊管体旋压道次的试验研究
2.
Research on Forming Mechanism of Multi-Pass Conventional Spinning Process and Influence of Roller-trace on the Process;
多道次普通旋压成形机理与旋轮运动轨迹作用的研究
3.
Finite Element Simulation of Process for Multi-Cycle Spinning and Pulley Spinning
多道次拉旋及皮带轮旋压成形工艺的有限元模拟研究
4.
3D FE Analysis on Deformation Mechanism and Laws of Multi-pass Spinning of Large Complex Thin-walled Shell;
大型复杂薄壁壳体多道次旋压成形机理及规律的三维有限元分析
5.
Swirl number calculation in the inlet of spinning ramjet assisted range projectile
旋转冲压增程弹进气道内流场旋流数计算
6.
Application of High Pressure Spinning Jetting Pile in Consolidating Surrounding Rock in Tunnel
高压旋喷桩在隧道围岩加固中的应用
7.
Numerical research of three dimensional flow-path in a ram-rotor
旋转冲压压缩转子三维进气流道数值研究
8.
Study on spinning of cylinder part based on second development of Abaqus software
基于Abaqus软件二次开发技术筒形件旋压过程研究
9.
Effects of gyration compaction number on design and performance of Superpave mixture
旋转压实次数对Superpave混合料设计和性能的影响
10.
The Spineorbit Coupling Items Influence on the sequence of the Multimode Energy Levels;
自旋轨道耦合因子对多重态能级次序的影响
11.
Multi Cycle Spinning Thickness Reductior Rate Study and Optimization of Processing Parameter
多道次拉旋减薄率研究及工艺参数优化
12.
" Multipolar and two-speed electrical resolvers, general specification for"
GB/T10404-1989多极和双通道旋转变压器通用技术条件
13.
Design of Hydro-Spin Spraying Booth for Railway Vehicles
液力旋压式喷漆室应用于铁道车辆的设计计算
14.
Study on a Subway Shield Tunnel under the Excess Pore Pressure by High-pressure Jet Grouting;
地铁盾构隧道受高压旋喷桩挤土作用的研究
15.
Development and Research on New Type Multi-Channel Rotary Press Filter
新型多通道旋转挤压脱水机的开发与研究
16.
Design of Intelligent Shaft Encoder Based on Two-channel Revolving Transformer
基于双通道旋转变压器的智能编码器设计
17.
Application of High Pressure Jet Grouting Pile in Strengthening Soft Foundation in Expressway Tunnel
高压旋喷桩在高速公路隧道软基加固中的应用
18.
Numerical Simulation and Performance Research of Flow-Path in a Ram-Rotor
旋转冲压压缩转子进气流道数值仿真及性能研究