1.
Study on the Relation between Percentage of Moisture of Chopped Corn Stalks and the Force of Room Temperature Compression
玉米秸秆含水率与常温压缩成型压力之间关系的研究
2.
Electrosynthesis of B_2O with Diamond-like Structure at Ambient Temperature and Pressure;
金刚石型B20的常温常压电化学合成
3.
Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.
将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。
4.
Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.
将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。
5.
3D Flow Simulation for Viscous Incompressible and Non-isothermal Melt in Injection Molding;
注塑成型中粘性不可压缩非等温熔体的三维流动模拟
6.
The Studies of Biomass Solidifying Technology and Principle with High Pressure on Natural Conditions for Bio-fuel Making;
生物质燃料常温高压致密成型技术及成型机理研究
7.
Study on Miniature Scroll Air Compressor in Cooling The temperature
微型涡旋空气压缩机的冷却降温研究
8.
" Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures"
GB/T7759-1996硫化橡胶、热塑性橡胶常温、高温和低温下压缩永久变形测定
9.
Typically hydrogen is stored in pressure tanks as a highly compressed gas at ambient temperature.
常温下,氢气通常以高度压缩气体的形式,贮存于压力瓶中。
10.
fine ceramics(advanced ceramics, advanced technical ceramics)-test method for compressive strength of monolithic ceramics at room temperature
细陶瓷-单块陶瓷常温耐压缩强度试验方法
11.
Research on the Compressibility and Resilience of the Gaskets Reinforced by Corrugated Metal Sheet at Room Temperature
波齿复合垫片常温压缩回弹性能试验研究
12.
A construction board made by compressing fibers of wood chips usually with a binder at a high temperature.
硬质纤维板一种由木屑纤维压缩制成的通常与粘合剂在高温下使用的建筑板
13.
Synthesis ammonia electrically at atmospheric pressure and low temperature with the fluorosulfonic proton exchange membrane
全氟磺酸型质子交换膜在低温常压电化学合成氨中的应用
14.
" Rubber, vulcanized--Determination of stress relaxation in compression at normal and at elevated temperature"
GB/T1685-1982硫化橡胶在常温和高温下压缩应力松弛的测定
15.
THE MODEL FOR PREDICTING AERODYNAMIC STABILITY IN THE AXIAL COMPRESSION SYSTEMS WITH INLET DYNAMIC TEMPERATURE DISTORTIONS
动态温度畸变下压缩系统稳定性模型研究
16.
Flow stress behaviors of in-situ TiB_2/6351 composite during hot compression deformation at elevated temperatures
原位合成TiB_2/6351复合材料的高温压缩流变行为
17.
Studies on Properties of Stalk Chopping and Briquetting and Performances of Equipment;
秸秆切碎及压缩成型特性与设备研究
18.
The Study on Plastic Injection-Compression Precision Molding Technology and Molding Equipment;
塑料注射—压缩精密成型技术及成型装置的研究