1.
Analysis and Preventive Measures of Turbine’s Main-pump Switched Experiment
汽轮机主油泵切换试验不成功的原因分析及预防措施
2.
control and primary scavenging pump
控制泵和主动回油泵
3.
shaft-driven oil pump
主轴(驱动的)油泵
4.
diesel oil and heavy oil automatic selecting test
柴油-重油自动切换试验
5.
hoist pump drive gear
起重机油泵主动齿轮
6.
Disposal of No Switchover Trouble for Transfer Case of Truck-mounted Concrete Pump
混凝土泵车分动箱不切换故障的处理
7.
Short Way to Converse Performance of Centrifugal Pumps
离心输油泵性能换算的简捷计算方法
8.
Improving and Programme Optimized of Grease Lubrication System for Caster in CSP Plant of HG
干油填充泵空限位改造及主泵控制程序优化
9.
The Design of Adaptive 1X/2X Regulating Charge Pump;
自动模式切换1X/2X电荷泵电源驱动芯片的设计
10.
Analysis of the Boiler MFT Fault Caused by Feed Pump Switching in a power plant
某电厂给水泵切换导致锅炉MFT事故分析
11.
Improved Design of Drive Shaft of CA6DL Engine Oil Pump
CA6DL机油泵主动轴传动方式的改进设计
12.
Commutation Study of DC Motor for Automotive Fuel Pumps
汽车电动燃油泵用直流电动机换向研究
13.
Operation test of emergency switching-off device for oil pump and ventilator (bilge pump) in engine room.
机舱风、油（舱底泵）应急切断装置操作试验。
14.
Performances of Experiments Impellers Trimmed with Different Outlet Angles of Blade for a Centrifugal Oil Pump While Pumping Water
不同出口角离心油泵叶轮切割性能实验
15.
Numerical Simulation of Three-dimensional Flow Based on High Shear Pump for Ink Mixing
基于高剪切泵油墨混合的三维流场数值模拟
16.
Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc.
产品主要结构：油箱、油管、安装支架、油泵总成及涂油轮等组成。
17.
fuel oil priming pump
起动充油泵、起动燃油泵
18.
fuel-oil transfer pump
燃油输送泵，输油泵