1.
Technical Research of 42CrMo Alloy Bar's Rolling With Cooling
42CrMo合金棒材降温轧制工艺研究
2.
according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.
根据轧制轧材的温度，轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。
3.
Modeling the temperature-dropping pattern of the ultra-low-carbon finishing stands in the 2~(nd) hot-rolling plant at Wisco
武钢二热轧超低碳钢精轧机组温降模型的建立
4.
Software of forecasting finish rolling temperature for HSM was developed based on the traditional strip temperature dropping model.
在传统热连轧精轧机组温降模型基础上，开发了带钢热连轧终轧温度预报软件。
5.
On the Model of Prediction Temperature and Rolling Force Model in Splitting Caliber for Continuous Rolling Steel Angles
角钢连轧温度预报与切分孔轧制力模型
6.
Research about the Rolling Temperature Model and Its Influencing Parameters of Cold Tandem Mills;
冷连轧机轧制温度模型及其影响因素的研究
7.
Adaptation strategy of finishing temperature control for hot strip rolling
热连轧精轧温度控制的自适应策略研究
8.
Optimization of Production Mode,Reduction of the Wastage of Mix-Gas
开发焙烧炉“保温模式”,降低冷轧吨钢煤气消耗
9.
Study on process of improving cast-rolling strip quality by temperature lowering and speed increasing
降温提速提高铸轧带材质量的工艺研究
10.
Evolution of microstructure and texture of AZ31 magnesium alloy extrusion sheet by hot rolling with falling temperature
AZ31镁合金挤出板降温热轧的组织和织构的演变
11.
The Temperature Simulation of 72A High-Carbon Steel Wire during Rolling Process;
72A高碳钢轧制过程中的温度模拟研究
12.
H_∞ robust control for coiling temperature in hot rolling processing
热轧带钢卷取温度的H_∞鲁棒控制
13.
Prediction of Rolling Temperature of Medium and Heavy Plate Based on GRNN Neural Network
基于GRNN网络的中厚板轧制温度的预测
14.
The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.
结果表明：轧制温度为1250℃两道次的轧制变形率为50％，界面结合较好。
15.
Effect of Roll Gap Geometry and Rolling Temperatures on the Evolution of Deformation Textures and Microstructure in Rolled Non-oriented Silicon Steel
轧制几何和温度因素对无取向硅钢轧制形变织构及组织的影响
16.
The Application of Fuzzy Control in Cold-rolling Pickling Line Temperature Control;
模糊控制在冷轧酸洗线温度控制中的应用
17.
Application of Rules Self-Optimizing Fuzzy Controller to Rolling Temperature Control
规则自寻优模糊控制在轧钢温度控制中的应用
18.
Edge drop control using sinusoidal tapered work roll on a UCMW mill
UCMW轧机正弦函数形单锥度工作辊边降控制