1.
Research on Measuring Uncertainty Parameter of Tooth Profile Slope Deviation
齿廓倾斜偏差测量不确定度参数的确定
2.
Parameterize Tooth Profile Slope Deviation Measuring Uncertainty in Gear Measuring Center Standard
齿轮测量中心标准中齿廓倾斜偏差测量不确定度参数的确定
3.
heeling error
【航海】倾斜自差, 倾斜飞行;(铣头的)偏转角
4.
Finite Element Contact Analysis of Helical Gears with Surface and Shaft Deviations
考虑齿面及轴线偏差的斜齿轮接触有限元分析
5.
Basic tooth profile of straight and skew bevel gears
GB/T12369-1990直齿及斜齿锥齿轮基本齿廓
6.
Adopting the engaging process of the measuring rack- probe, the error of straight generatrix is measured, and by error analysis, the tooth profile error and tooth orientation error can be obtained.
采用刃边齿条测头,测量齿轮廓面的直母线偏差,通过误差分析分离出齿廓总偏差和螺旋线总偏差。
7.
Having a slanted or oblique direction.
斜的带有偏斜的或倾斜方向的
8.
limit deviation of root circle diameter
齿根圆直径极限偏差
9.
" Straight cylindrical involute splines--Modules, basic rack profiles and tolerances"
GB/T3478.1-1995圆柱直齿渐开线花键模数基本齿廓公差
10.
arithmetical mean deviation of the (roughness) profile
(粗糙度)轮廓的算术平均偏差
11.
Three-dimensional Modeling and Finite Element Analysis of Helical Gear based on the Actual Design Tooth Profile
基于实际设计齿廓斜齿轮的三维建模与有限元分析
12.
Deflect Correction for Document Image Based on Its Schema Histogram
基于轮廓投影方法的文本图象偏斜纠正
13.
An Algorithm to Measure the Profile of Gears under Eccentric State Based on Dichotomy
定位偏心状态下基于二分法的齿廓测量算法
14.
To take an oblique direction or course;swing around, as a ship.
倾向一边取一个斜的方向或路径，如船的偏斜
15.
Measuring and Analysis of Pitch Deviation and Tooth Form Deviation of Bevel Gear
锥齿轮齿距及齿形偏差测量与分析方法
16.
Transmission error analysis of planetary gear train based on straight profiled internal gear
基于直廓内齿轮的行星轮系传动误差分析
17.
Designating geometric lines or planes that are neither parallel nor perpendicular.
斜的，倾斜的，偏斜的由既不平行也不垂直的几何直线或平面表示的
18.
The influence of different angles of the occlusal plane on the supporting tissues of edentulous jaws
全口义齿?平面倾斜角度对支持组织受力的影响