1.
Plastic Deformation and Nanocrystallization of Metallic Materials at High Strain Rate
金属材料的高应变率塑性变形及纳米化
2.
The flow stress can be described by temperature-compensated strain rate, the so-called Zener-Hollomon parameter.
3．利用7055铝合金高温塑性变形时稳态流变应力σ、应变速率(?)
3.
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
4.
Influence of Strain Rate on Grain Refinement by Plastic Deforming;
应变速率对强塑性变形晶粒细化的影响
5.
Flow Stress of 7050 High Strength Aluminum Alloy during High Temperature Plastic Deformation
7050高强铝合金高温塑性变形的流变应力研究
6.
Study on Flow Stress Behavior of TA15 Titanium Alloy during High Temperature Plastic Deformation
TA15钛合金高温塑性变形流变应力行为研究
7.
extrusion stress
(塑性变形的)挤压应力
8.
Improvement on the Severe Plastic Deformation Method and Investigation on the Mechanical Properties of Ultra-Fine Grained Aluminum;
强塑性变形方法的改进及超细晶纯铝应变速率敏感性研究
9.
Preparation of Y-TZP/MgAl_2O_4 Ceramic Composite and Research on Its High-Strain-Rate Superplasticity;
Y-TZP/MgAl_2O_4复相陶瓷的制备及高应变率超塑性研究
10.
Study on High Strain Rate Compression Superplasticity of Commercial AZ31 Magnesium Alloy;
工业态AZ31镁合金高应变速率压缩超塑性研究
11.
It is assumed that plastic deformation stems from the localization of shear strain.
岩样的塑性变形假设根源于塑性应变局部化。
12.
Research on Hot Deformation Behavior of Nodular Cast Iron and Its Application
球墨铸铁高温塑性变形行为研究及其应用
13.
Influence of Cold Rolling Process on Plastic Strain Ratio of 1100 Aluminum Alloy Plates and Earring Ratio of Cup-shaped Parts
冷轧生产工艺对1100铝合金板塑性应变比与杯形件制耳率的影响
14.
The characteristics of flow stress and dynamic constitutive model at high strain rates for pure iron
纯铁在高应变率下的流动应力特征及其动态塑性本构关系
15.
EFFECT OF PRESTRAIN ON THE SUPERPLASTIC DEFORMATION BEHAVIOR OF LOW-ALLOY HIGH-CARBON STEEL
预变形对低合金高碳钢超塑性变形行为的影响
16.
Superplasticity of TA15 Titanium Alloy Induced by Strain Rate Cycling
TA15合金应变速率循环超塑性研究
17.
Moreover, the high temperature plasticity increase with the strain rate.
此外该合金的高温塑性亦随应变速率的增大而增加。
18.
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形