1.
The scanner is not responding. If problem persists, refer to scanner manual to troubleshoot.
扫描仪没有响应。如果继续发生该问题，请参考扫描仪手册以排解疑难问题。
2.
Two same scan protocols were prepared: unenhanced helical and enhanced CTA.
即制定两组扫描参数相同的计划螺旋采集平扫与增强扫描。
3.
On Characters of Bandgap Parameter Scanner of Two-dimensional Photonic Crystal;
二维光子晶体带隙参数扫描特性研究
4.
Measurement of Optical Properties of Biological Tissue Based on Scanning Photoacoustic Technology
利用扫描光声技术测量组织光学参数
5.
"The device is not in scannermode. Please check the manual how to change to thwe scannermode.
"设备没有处在扫描模式。请参阅手册查看如何变换到扫描模式。
6.
The mid-resolution microwave scanning radiometer is a conical scanning total power radiometer with a fixed visual angle and double-reference temperature.
仪器实施的方案为固定视角圆锥扫描双参考温度外部两点式周期定标全功率型。
7.
If the reference element has a phase of zero, compute the phase applied to element five when the beam is scanned 40o above the boresight axis.
如果参考单元的相位是零，计算第五单元当扫描视轴线以上40度的相位。
8.
Analog sweep
模拟式扫描(连续式扫描)
9.
Digital sweep
数字式扫描(量化式扫描)
10.
Characteristic parameters are discussed as well.
另外,对扫描光栅的特征参数进行了分析。
11.
"Starts the scans of the area you selected with the parameters you set up (except mirror)
"开始扫描您的参数所设好的区域(除了镜像)
12.
The extended stored procedure parameters for the schedule scan routine were not loaded.
未加载调度扫描例程的扩展存储过程参数。
13.
Parameter three that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数3无效。
14.
Parameter five that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数5无效。
15.
Parameter zero that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数0无效。
16.
Parameter one that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数1无效。
17.
Parameter four that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数4无效。
18.
Parameter two that was supplied to the schedule scanning extended stored procedure was not valid.
提供给调度扫描扩展存储过程的参数2无效。