1.
In vacuum, the height of the steps is smaller, and the fatigue striations and dimples are finer.
真空环境下疲劳断口中台阶高度较低,疲劳条纹与韧窝较细小。
2.
(3) In the high rowth-rate region the rate propagation of fatigue cracks isgoverned by the striation growth mechanism as ell as by the dimple mechanism.
(3)在高速率区,裂纹扩展速率行为是由疲劳条纹生长机制和韧窝机制所控制.
3.
Numerical Simulation Analysis of Crack Opening of 1.25Cr-0.5Mo under Fatigue-Creep Interaction
蠕变条件下1.25Cr-0.5Mo钢疲劳裂纹扩展数值模拟分析
4.
STUDY ON FATIGUE CRACK GROWTH BEHAVIOR OF 16MnR STEEL UNDER DIFFERENT CONDITIONS
16MnR钢在不同条件下的疲劳裂纹扩展规律
5.
The chief character of fracture is fatigue striation and dimple.
断口分析表明，合金低周疲劳断口的主要特征是平行的条纹及韧窝。
6.
A New Find in Experimental Research on Coalescence Between Two Neighbor Cracks in a Copper Strip under Cyclic Tensile Loadings
铜长条薄板在疲劳载荷下裂纹聚合的试验研究和一个新发现
7.
SHORT CRACKS GROWTH AND FATIGUE DAMAGE UNDER TWO STEP LOADING
两级载荷作用下疲劳短裂纹扩展与疲劳损伤
8.
Fatigue crack growth and fatigue life evaluation for welded steel bridge members with initial crack
具初始裂纹钢桥梁焊接构件疲劳裂纹扩展和疲劳寿命计算
9.
THE EFFECTS OF PAINTING VASELINE FILMS IN CRACK TIP ZONE ON FATIGUE CRACK GROWTH
凡士林油膜对疲劳裂纹扩展的影响
10.
THE FEATURE AND MECHANISM OF FATIGUE CRACK PROPAGATION IN TOOL AND DIE STEELS
工模具钢中疲劳裂纹扩展特征与机制
11.
Dispel fatigue of eyes, baggy, black orbit, reduce the wrinkle.
消除视疲劳/眼袋/黑眼圈，减少皱纹.
12.
Research on Fatigue Crack Growth of 16MnR Steel with ANSYS;
基于ANSYS的16MnR钢疲劳裂纹扩展分析
13.
Study on Fatigue Crack Growth of 14MnNbq Steel and Welds;
14MnNbq钢和焊接件的疲劳裂纹扩展研究
14.
Simulation of Structure Fatigue Crack Initiation and Growth;
结构疲劳裂纹产生与扩展的计算模拟
15.
Study on Fatigue Small Crack Propagation Behavior in TA6V Titanium Alloy;
TA6V钛合金疲劳小裂纹扩展行为研究
16.
Numerical Studies on the Crack Closure Effect in Fatigue Crack Propagation;
疲劳裂纹闭合效应数值模拟方法研究
17.
Study on Little Fatigue Crack Growth Rates of A7N01P-T4 Aluminium Alloy
A7N01P-T4铝合金疲劳小裂纹扩展特性研究
18.
Investigation of Fatigue Crack Deflection for A357 Casting Aluminium Alloy
A357铸造铝合金疲劳裂纹偏折研究