1.
Preparation of metallic samples with slip band during cold plastic deformation and experimental performance
金属冷塑性变形滑移带样品制备及实验运行
2.
Evolution of Persistent Slip Bands in Fatigued Copper Single Crystals Under Intermediate Temperature Recovery
中温回复下疲劳Cu单晶体驻留滑移带的演变
3.
SLIP DISPLACEMENT AND ITS RATE ABOUT ZEMUHE FAULTS
则木河断裂带的走滑位移及滑动速率
4.
The dynamics and variable structure coordinated control of space based manipulator with prismatic joint;
带滑移铰空间机械臂的动力学与协调运动的滑模控制方法
5.
Bifurcation analysis of kink bands of bi-slippage crystal metamorphic rock under plane strain
双滑移系单晶岩石平面应变扭折带分叉分析
6.
translation gliding
平移滑动, 直移滑动
7.
A study on load distribution and slip characteristics of metal V-belt CVT
金属带式无极变速传动的载荷分布及滑移特性研究
8.
The Optimizing Clamping Force Control for Metal Pushing V-belt Continuously Variable Transmission Based on the Slipping;
基于滑移的金属带式无级变速器最佳夹紧力的控制研究
9.
Stationary Solutions of Navier-Stokes Equations with Slip Boundary Conditions in Channel-like Domains
管型区域内带滑移边界条件的Navier-Stokes方程的稳态解
10.
lubricant carrier
(拔丝)润滑引带剂
11.
When the belts have been located in the belt pulley grooves,moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.
在安装新皮带时，要用手动的方式使电机向驱动轴移动而使所有皮带均处于滑轮槽内。
12.
The stepping motor drives the take-up spindle via a fuse-it bult which allows for drive slippage as the diameter of the web take up changes.
步进电机通过带有过载保护的传动带驱动卷轴，能够随卷径的变化进行滑移。
13.
ANSYS Analysis on Sliding Displacement of Sliding Isolated Structure;
滑移隔震结构滑移量的ANSYS分析
14.
This can create a howling or squealing type noise and uneven stacking or slipping of the rewind coil being produced.
这种情况会造成呜嚎或尖啸类型的噪声，料卷卷边不齐或者产生卷取机带卷滑移。
15.
When work rolls become worn the roughness is diminishing creating slippage in the roll bite at higher speeds.
工作辊磨损后，粗糙度递减导致在较高轧制速度下进料（咬入带卷）时产生滑移。
16.
Boundary Slip Problem of Lubricants in Elastohydrodynamic Lubrication
弹流润滑状态下润滑剂的边界滑移问题
17.
slipping of upper femoral epiphysis
股骨上端骨骺滑脱移位
18.
mobile lubricant reclamation system
移动式润滑油更换设备