1.
Stress Measurement and Analysis of the Weld of Coke Tower Skirt and Crack - Protection
焦炭塔裙座焊缝应力测试分析及其裂纹防治
2.
The Measuring and Analysis of the Temperature and Stress in the Weld Region of the Coke Tower Skirt
焦炭塔裙座焊缝区域温度及应力的测试与分析
3.
Data and Test Analysis of Lost Efficacy on the Welding Welding Connection in the Coke Tower between Chack Tower between Tower Body and Its Skirt;
焦炭塔裙座与塔体连接焊缝失效的数值与试验分析
4.
sew a dress, skirt, etc
缝制连衣裙、 裙子等
5.
AN APPROACH TO MAGNETIC PARTICLE DETECTION TECHNOLOGY USED FOR ANGLE WELD JOINT ON SMALL SIZE TUBE SOCKET BASED ON YOKE MAGNETIZATION METHOD
小尺寸管座角焊缝磁轭法磁粉检测工艺探讨
6.
Crack Causes of the Engine Base of a Pressure Vessel and Countermeasures
压力容器机座焊缝开裂原因及应对措施
7.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
8.
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
9.
The pressurizer is supported by the butt-welded connection between the integrated forged boss on the lower endplate and supporting cylinder on the skirt support.
稳压器的支承设计采用下封头整体锻出的凸台与裙座支承筒对接焊连接。
10.
this dress is sewn by hand.
这条裙子是手工缝制的。
11.
She sew a frill on the bottom of her skirt
她在裙摆下缝了条褶边
12.
Ask the tailor to lengthen this skirt.
请裁缝把这条裙子放长。
13.
She sewed a frill on the bottom of her skirt.
她在裙摆下缝了条褶边。
14.
A bind halfway up the seam of the skirt.
裙子中间接缝的地方
15.
DC seam welder-"C"France Type.
直流缝焊机,"C"型。
16.
a skirt sewed with fine flat seams.
一条缝制得线缝细密平整的裙子.
17.
The old dressmaker has stitched up the skirt.
老裁缝已经把裙子缝好了。
18.
a stitch used in sewing hems on skirts and dresses.
缝制裙子或礼服边时用的一种缝法。