1.
Formability of warm hydroforming of AZ31B magnesium alloy tube
AZ31B镁合金管材热态内压成形性能的研究
2.
Hydroforming of Aluminium Alloy Tubular Components with Rectangular Section;
矩形截面铝合金管件内高压成形研究
3.
Spin-forming numerical simulation of cup-shaped inner meshing gear
杯形内啮合齿轮旋压成形的数值模拟
4.
Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear
杯形薄壁梯形内齿旋压成形工艺的试验研究
5.
FE simulation on the ball spinning forming of inner grooved copper pipe
内螺纹铜管滚珠旋压成形有限元模拟
6.
Thin-walled Tube with Small Radius and Internal Medium Pressure Forming Technique
薄壁小半径弯管与中压内胀成形工艺
7.
Research of the Control System of the Internal High-Pressure Forming Equipment Based on LabVIEW;
基于LabVIEW的内高压液压成形机控制系统研究
8.
Study on Ball Spinning of Tubular Parts with Longitudinal Inner Rib
纵向内筋筒形件滚珠旋压成形的工艺研究
9.
Research on Hydroforming of Profiled Cross-section Hollow Component;
异形截面空心结构件内高压成形工艺研究
10.
Influence of loading paths on hydroforming process of stainless steel spherical part
加载路径对不锈钢球形件内高压成形过程影响
11.
Research on Internal Wrinkling and Forming Limit of Strip Metal In-plane Bending under Unequal Compressing;
板带不均匀压下面内弯曲成形过程内缘起皱与成形极限的研究
12.
An Investigation on One-step and Two-steps Tube Hydroforming(THF) Using Finite Element Method
管件内高压单步成形和两步成形法数值仿真研究
13.
The development of colonic diverticulum is thought to be result of raised intraluminal colonic pressures.
（憩室的形成，相信是结肠内压力增加而引致。
14.
(of glass) formed by forcing air into a molten ball.
（指玻璃）施压将空气注入熔化的球体内而形成。
15.
Finite Element Simulation and Technique Analysis of X-joints Hydroforming Process;
四通管内高压成形有限元模拟及工艺分析
16.
Deformation Limit of Hydroforming of AZ31 Magnesium Alloy Tubes at Elevated Temperature;
AZ31镁合金管材热态内高压成形极限研究
17.
Research on Apparatus Parameters of Strip Metal In-Plane Bending under Unequal Compression;
板带不均匀压下面内弯曲成形装置参数的研究
18.
Numerical Simulation and Optimization of Hydroforming of T-shaped Tube;
T型管内高压成形数值模拟及工艺参数优化