1.
Multi-objective intelligent optimization of injection molding parameters based on BP-NSGA
基于BP-NSGA的注塑参数多目标智能优化设计
2.
Simulation of Injection Molding and Optimization of Molding Parameter for the Plastic Part with Complicated Structure
复杂塑件的注塑成型模拟及工艺参数优化
3.
Process Parameters Optimum of Injection Molding and Injection Mould Design of Plastic Gear
塑料齿轮成型工艺参数优化及注塑模具设计
4.
Effect of injection parameters on residual stress of plastic long ruler
注塑工艺参数对塑料长尺残余应力的影响
5.
Effect of Packing Parameters on Warpage of Moulded Part during Injection Moulding
注塑成型保压参数对塑件翘曲变形的影响
6.
A Parametric Drawing System of Large Injection Mold Base;
塑料注射模大型模架参数化绘图系统
7.
Key technologies of parametric design for the injected mold based on Pro/E
基于Pro/E注塑模参数化设计关键技术
8.
Optimization of Injection Mould and Rapid Setting of Processing Parameters of Injection Moluding Based on Numerical Simulation
基于数值模拟的注塑模具优化及注塑成型工艺参数快速设置
9.
Influence Analysis of Injection Process Parameters on Sequential Overmolding Injection
注塑工艺参数对双色注射成型影响分析
10.
Numerical Simulation Research of the Injection Molding for Thin-Wall Plastic Parts and Optimize of the Process Parameter;
薄壁塑件注塑成型的数值模拟和成型工艺参数优化的研究
11.
Research on Innovative Mould Board of Injection Machine and Development of Its Parametric Design System;
注塑机创新模板研究及其参数化设计软件开发
12.
Experiment Research on Influence of Processing Parameters on Part Quality in Injection Molding;
注塑成型工艺参数对制品质量影响的实验研究
13.
Development in Three-Dimentional Parametric Graphics Library for Mold Bases of the Injection Mold;
注塑模具三维参数化标准模架图形库的开发
14.
The Simulation of Injection Processes of an Injection-molded Part with a Thin Shell Feature and the Optimization of Processing Parameters;
薄壳件注塑成型的计算机模拟及工艺参数优化
15.
A Simulation-Based Research on the Optimization Methodology for Injection Warp Parameters;
基于仿真的注塑翘曲参数优化方法的研究
16.
On-line Optimization and Detection of Process Parameters for Plastic Injection Molding Machine
塑料注射成形机工艺参数的在线优化与检测
17.
The Parametric Design and Dynamic Analysis for Injection Robots
注塑机械手的参数化设计及动力学分析
18.
Study on Key Technology of Parametric Design for Injected Mold Based on Pro/E
基于Pro/E注塑模具参数化设计关键技术研究