1.
Effect of Geometry of Rotary Valve Orifice on Response Characteristics
转向控制阀阀口结构对灵敏度特性的影响
2.
Structure Optimization and Reliability Analysis for Large-calibred Gate Valve Body
大口径闸阀阀体结构优化与可靠性分析
3.
Research on Structural Design of Valve Port Dynamic Pressure of Direct Acting Relief Valve
阀口动压反馈直动式溢流阀的结构设计研究
4.
Strength analysis and structural optimization for large-calibred gate valve body by using AWE
基于AWE的大口径闸阀阀体强度分析与结构优化
5.
This connected burden receiving valve is lower sealing valve. This valve's structure is the same burden receiving valve, only diameter is differential.
与料流调节阀连接的是下密封阀，下密的结构与上密封相同，只是口径不同。
6.
Stem – machined stem has a backseat design.
阀杆-经过机加工的阀杆具有后座结构。
7.
" Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Wafer valves"
GB/T15188.2-1994阀门的结构长度对夹连接阀门
8.
"Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Buttwelding valves"
GB/T15188.1-1994阀门的结构长度对焊连接阀门
9.
The check valve seats shall be of molded thermoplastic construction.
止回阀阀座应该是模制热塑塑料结构。
10.
Stem– precision machined stem has a backseat design.
(11) 阀杆-精加工阀杆配置后座结构。
11.
"Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves"
GB/T15188.4-1994阀门的结构长度外螺纹连接阀门
12.
" Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves"
GB/T15188.3-1994阀门的结构长度内螺纹连接阀门
13.
The Fig. 1710 Balancing valve is a non-rising stem design incorporating a parabolic (plug) shaped disc.
型号1710平衡阀为暗杆结构，配置抛物线(塞)形阀瓣。
14.
Experimental Research on Effect of Electromagnietic Valve s Structure on Water Hammer;
电磁阀阀芯结构对水锤影响的试验研究
15.
The Analysis of Valve Architecture and VBE Control Principle of ±800kV Yunnan-Guangdong UHVDC Transmission
±800kV云广直流换流阀及阀控系统结构及原理分析
16.
Study on Weakening for Cone-valve Typed One-way Valve Based on Its Structural Parameter Optimization
基于结构参数优化的锥阀式单向阀消振研究
17.
This prevents stem from scoring and galling and provides longer disc seal and body life.
这种结构避免阀杆刮伤和磨损，延长阀瓣密封和阀体的使用寿命。
18.
Optional disc configuration which provides line contact between spherical disc and conical body seat.
备选阀瓣结构，在球形阀瓣和锥体阀座之间具有线接触作用。