1.
Measurement and analysis of free-field pressure and ship hull pressure underwater explosion
水下爆炸中自由场压力和船体壁压的测量与分析
2.
Cargo, ballast ammunition and 400 people went sliding and crashing down to the port side of the steeply listing ship.
船上的货物,压舱物,弹药以及400人轰的一声滑到急剧倾斜的船体左舷壁
3.
aluminium alloy integrally extruded panel
铝合金整体挤压壁板
4.
For boot top, hull interior and exterior, or container exterior.
主要用于船体的水线，船壳内、壁使用、可用于集装箱外壁使用。
5.
Wall Pressure Analysis of Cabin Model Subjected to Underwater Explosion
舰船舱段模型在水下爆炸作用下的壁压分析
6.
The hull of a ship loomed up suddenly through the fog
一条船的船体突然黑压压地在雾中出现。
7.
fore peak bulkhead
防撞舱壁船首)防撞舱壁
8.
A liquid presses on the sides and on the bottom of the container in which it rests.
液体压迫其所在容器的四壁和底部。
9.
Fluid-structure Interaction Analysis of Bending-torsion Coupling Vibration of Thin-walled Ship Hull;
船体薄壁梁弯扭耦合振动的流固耦合分析
10.
The Analysis Vibration of Thin-wall Ship Hull with Hatch Opening under the Load of Crosswise Component;
横向加强构件作用下开口薄壁船体的振动分析
11.
Joint measurements of surface pressure fluctuations and near-wall turbulent flow at the etern of an underwater vehicle model
水下航行体模型尾部壁面脉动压力与近壁湍动速度同步测试研究
12.
A transverse structural member of a ship's frame, used to support a deck and to brace the sides against stress.
船梁船的横向结构，用以支撑甲板并固着在船体的两则以抵抗压力
13.
The Influence of Ballast Water on Bulk Carriers Safety Operations;
压载水对固体散货船安全营运的影响
14.
Study on Pressure Hull Structure Design of Large Deep Diving Submarine;
大型深潜潜艇耐压船体结构设计研究
15.
Resistance to Overturning Critical Force Research of Cold-formed Thin-walled C Steel Compression Member;
冷弯薄壁C型钢压杆整体稳定临界力的研究
16.
Large eddy simulation of wall pressure fluctuations of underwater vehicle
水下航行体壁面脉动压力的大涡模拟研究
17.
Crush Dynamics of Square Honeycomb Thin Rubber Wall
方形蜂窝薄壁橡胶墙体的动力挤压分析
18.
STRUCTURAL DESIGN OF AN ELEVATED CONSTANT-PRESSURE TANK SUPPORTED BY A THIN-WALLED STEEL CYLINDER
薄壁筒体承重钢结构高位稳压水箱结构设计