1.
Spinning Practice of Tencel Organic Cotton Air Jet Vortex Yarn
Tencel有机棉喷气涡流纱的试纺
2.
Development of wool/viscose/polyester three components MVS yarn and its property analysis
毛/粘胶/涤纶喷气涡流纱的开发及成纱性能分析
3.
Development and Property Analyses of Modal Polyester Flax Air-jet Vortex Yarn
Modal涤纶亚麻喷气涡流纱的开发及性能分析
4.
Investigation on Yarn Structure and Fabric Properties of Ai-jet Vortex Spinning;
喷气涡流纺（MVS）成纱结构及其织物性能的研究
5.
axial flow turbojet
轴流式涡轮喷气发动机
6.
Two methods of open -end or break spinning are in use: rotor spinning and fluid or air or vortex systems.
目前采用的开端纺纱或叫自由端纺纱的方法有两种：气流纺纱和流体(或空气,或涡流)纺纱。
7.
Study on Gas Separation Performance of Vortex Tube with Supersonic Inlet Nozzles
超音速喷嘴涡流管气体分离性能研究
8.
Study on the Cool Flow Field in Trapped Vortex Combustor with Air Injection
驻涡燃烧室冷态流场气体喷射的研究
9.
Turbulence in air or water caused by the motion or action of an oar, propeller, jet, or airfoil.
涡流由船桨、推进器、喷气机或机翼运动引起的空气或水的涡流
10.
In an air jet loom, high pressure air carries the filling yarn through the shed.
在喷气织机上,高压气流携带纬纱穿过梭口。
11.
Study on Three-dimensional Swirling Airflow and Motion of Flexible Fiber in Air-jet Spinning Nozzle
喷气纺纱喷嘴内三维旋转气流场及柔性纤维运动的研究
12.
Effect of the Hub Cavity Flow on the Flow Structure of an Axial HP Turbine
涡轮封严气体喷射角度变化对主流的影响研究
13.
Effects of casing air injection position on controlling tip clearance flow in axial turbines
机匣喷气位置对涡轮间隙流动控制的影响
14.
Effects of casing air injection massflow rates on controlling tip clearance flow in axial turbines
机匣喷气量对涡轮间隙流动控制的影响
15.
Experimental Research on Pneumatic Torque of Adjustable Turbine Nozzle Guide Vane
可调涡轮喷嘴导流叶片气动转矩的试验研究
16.
These act as a sort of porous tube and tend to improve the axial air velocity. They also reduce the turbulence so that there is less isturbance to the filling.
这些带孔的管道可以改善轴线处气流的速度,也可以减少涡流,因此纬纱受涡流的干扰较少。
17.
centrifugal-flow jet engine
离心式涡轮喷气发动机
18.
double-compound turbo jet
双轴涡轮喷气发动机