1.
A Research on Galvanic Corrosion of Carbon Steel/Titanium Alloy Composite Materials in 3%NaCl Solution
碳钢/钛合金复合材料在3%NaCl溶液中的电偶腐蚀研究
2.
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、强度钢、碳钢、合金钢。
3.
Brazed Interface Microanalysis of Carbon-fiber Reinforced Composite Material and Titanium Alloy by Brazing Filler Metal Containing Ti Element
含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析
4.
Weldable materials: low carbon steel , high-strength steel ,medium-carbon steel, low-alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
5.
Oxidation Behavior and Mechanical Properties of Ti Alloys and Ti-based Composites;
钛合金和钛基复合材料的氧化行为及力学性能
6.
Effects of Carbon on the Aluminothermic Processing for TiN-Corundum Composite;
碳对铝热法合成氮化钛复合刚玉材料的影响
7.
Technology of preparation of CNTs/TiC powder with natural ilmenite as raw material
利用钛铁矿制备纳米碳管/碳化钛复合粉体材料的工艺
8.
Studies on Metal-TiO_2 Composite Antibacterial Materials;
金属—二氧化钛复合抗菌材料的研究
9.
The Study on the Properties of Titanium Substrate Metal Oxide Composite
钛基金属氧化物复合材料性能的研究
10.
It is an ideal material for precision casting of Carbon Steel, Stainless Steel, Rrefractory Steel as well as moudle of Alumina Alloy and Titatium Alloy.
是碳素钢、锈钢，耐热钢等复杂精密铸件和铝，钛合金熔模铸造的理想原料。
11.
Fabrication of TiC-TiB_2-Fe_xAl_y Locally Reinforced Carbon Steel Composite;
TiC-TiB_2-Fe_xAl_y局部增强碳钢复合材料的制备
12.
Fabrication and Heat-treatment Properties of Cu/Ti_3AlC_2 Composite;
铜钛铝碳复合材料的制备与热处理性能研究
13.
Fabrication and Properties of Al/Ti_3SiC_2-Class Composites
铝/钛硅碳系复合材料的制备与性能研究
14.
Study on the dielectric properties of TiC/epoxy nano-composites
碳化钛/环氧树脂纳米复合材料的介电性能研究
15.
Microstructure and Properties of Carbon Nanotubes Reinforced TiAl Alloys Composite
碳纳米管增强钛铝基复合材料的组织与性能
16.
The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.
拜尔牙、热固塑料、铜基合金、钛及钛合金是较为理想的牙科修复材料 ;
17.
Oxidation Resistance Of Different Matrix Composites;
不同基体合金钛基复合材料的高温氧化性能
18.
The Development of PCD Drill Used for Drilling Composites/Titanium Alloy
复合材料/钛合金装配制孔用PCD刀具的研制