1.
This mixture was heated to reflux for 1 hour.
该混合物加热回流1小时。
2.
STUDY ON REFLUX EXTRACTION OF ANTIOXIDANT COMPONENTS FROM AMOMUMTSAO-KO
加热回流法提取草果中抗氧化成分的研究
3.
METHODS The5 F was extracted by methanol and determined by HPLC.
方法用甲醇加热回流提取,反相高效液相色谱法定量分析。
4.
The reaction mixture is then heated to reflux for 2 hours while stirring. After being cooled to about 20 c, it is poured into 5 litres of ice water.
将反应混合物在搅拌下加热回流2小时。待冷却到20℃后,将其倒入5升冰水里
5.
Study on the regenerative system performance influenced by flow resistance loss existed in regeneration heater
加热器流动阻力损耗对回热系统性能影响研究
6.
A COMPARISON BETWEEN AN ION-CYCLOTRON RESONANCE MODEL FOR HEATING AND ACCELERATION OF THE SOLAR WIND AND THE OBSERVAIONS ON THE SOLAR POLAR CORONA HOLE BY UVCS ON SOHO
回旋波共振加热加速的多重离子流体模型
7.
Mass-flow-distribution Analysis and Numerical Simulation on Heater and Regenerator of Stirling Engine;
热气机加热器及回热器中流量分配的分析及数值模拟
8.
Product being introduced into the system begins the heating process in the regeneration section.
将产品引入此设备,开始在回流段进行加热。
9.
the sections of the plate heat exchanger on either side of the regeneration section are used for heating and cooling.
片式热交换器的另外两段位于回流段的两侧,用于加热和冷却。
10.
The regeneration, heating, and cooling sections of the pasteurization system are heat exchangers.
巴氏杀菌设备的回流、加热和冷却段均为热交换器。
11.
convector heater
ph.1. 对流加热器
12.
A portion of the temperature rise occurs in the regeneration section, utilizing high-temperature product as the heating medium.
在回流段,我们利用高温产品作加热介质,使低温产品的温度升高;
13.
"The mixture was refluxed for 20 to 24 hours to allow the reaction to proceed to completion, forming the chlorinated product"
将混合物回流加热20至24小时并充分反应,形成氯化产物
14.
"Finally, hydrochloric acid (327 kg) was added to the product (8) and the mixture was refluxed for approximately 2 hours to allow the amide to hydrolyze to the carboxylic acid."
最后,在产品(8)中加入327千克盐酸,混合物回流加热约2小时,使酰胺水解成羧酸。
15.
Research of Regenerative Systems Variable Condition Character of Coal-fired Power Plant;
火电厂回热加热系统变工况特性研究
16.
Practical approach to hydrophobic recovery of the sealing heater for self-equipped thermal plants
自备热电厂轴封加热器疏水回收方法
17.
magnetohydrodynamic shear heating
磁流体动力剪切加热
18.
tension electric process
电流直接加热淬火法