1.
Study and Application on Triaxial Tensile Test of Soil From Dike of Yellow River
黄河大堤土体三轴抗拉试验研究与应用
2.
Programming solver tools of Excel evaluate shear strength parameters from results of triaxial tests
Excel规划求解三轴试验抗剪强度指标
3.
Triaxial shear test on anti-shear properties of asphalt mixture
沥青混合料抗剪性能的三轴剪切试验
4.
The Study on Anti-crack Function and Damage of Concrete by Unixial Tension;
混凝土单轴拉伸下抗裂与损伤性能研究
5.
Experimental Study on Whole Stress-Strain Curves of Concrete under Axial Tension;
混凝土单轴抗拉应力—应变全曲线的试验研究
6.
Effects of specimen-preparing methods on tensile strength of remolded loess
制样方法对重塑黄土单轴抗拉强度影响的初探
7.
Anti-seizing test of floating bush of cone bit slide bearing
三牙轮钻头滑动轴承浮动衬套的抗胶合试验
8.
Constrol Scheme Design and Anti-Disturbance Problem Research of a Three-Axis Electric-Constrol Turntable
三轴电控转台控制方案设计与抗干扰问题研究
9.
Analysis of rock-socketed pile uniaxial compressive strength and bearing capacity of pile tip at three dimensional effects
嵌岩桩单轴抗压强度和三维作用下桩端承载力
10.
Anti-wear Structure of Tripod Sliding Universal Joints and Its Mathematics Modeling
滑移型三叉式联轴器抗磨损结构及数学建模
11.
Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength
基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
12.
Numerical Simulation on the Free Rotation of The Earth as a Triaxial Rigid Body
三轴刚性地球自由旋转欧拉角变化数值模拟研究
13.
Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Containing a Hole Under Axial Extension
含孔复合材料层合板轴向拉伸三维有限元渐进失效分析
14.
The correlation between the compressive strength and axial tensile strength of RCC with placing joint and ultimate tensile strain of placing joint of RCC layers have been obtained.
通过试验研究给出有层面碾压混凝土抗压强度、面轴拉强度与层面极限拉伸值间相关关系。
15.
One of three axes in a three - dimensional Cartesian coordinate system.
x轴三维直角坐标系中的三轴之一
16.
leading half axle
（拖拉机转弯时）前进半轴
17.
Pull vibration damper off of the crankshaft.
将减震器从曲轴上拉下。
18.
The output parameters of the model are three mechanical properties namely ultimate tensile strength (UTS), yield strength (YS) and elongation (ELO).
模型的输出为三个力学性能指标,即抗拉强度、屈服强度和延伸率。