1.
Finishing Technology of Large Diameter Blind Holes in Hydraulic Oil Tank Case
液压油箱壳体大盲孔的光整加工技术
2.
Technological analysis and design of flanging die for fuel oil tank shell
油箱壳体成形工艺分析与翻边模设计
3.
The Experiment Research on the Electromagnetically Assisted Sheet Forming of Aluminum Fuel Tanks Shell;
铝合金油箱壳体电磁成形复合冲压试验研究
4.
The Technological Process Analysis of Stamping Forming for the Outside Shell of Fuel Tank of Ride-Motorcycle
骑式摩托车油箱外壳体冲压成形工艺过程分析
5.
To provide a housing or case for(a machine part, for example).
装箱为（机体，例如）提供套壳或箱子
6.
The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.
油底壳和气缸体的下半部分一同被叫做曲轴箱；他们把曲轴封闭起来。
7.
double-case vertical centrifugal oil pump
双壳体立式离心油泵
8.
hydraulic oil pump driving device housing
液压油泵传动装置壳体
9.
flanged-mounted injection nozzle holder
突缘安装喷油器壳体
10.
Simulation Analysis and Experimental Validation of Thin Gear-box Shell Dynamic Responses
薄壳变速箱壳体动态响应仿真分析与试验验证
11.
Fuel oil purifier overhauled and cleaned, gear case oil renewed.
燃油分油机解体清洁，齿轮箱换油。
12.
"To provide a housing or case for (a machine part, for example)."
为(机体,例如)提供套壳或箱子。
13.
Processing Quality Forecast and Diagnosis for Gear-box Shell Production Line
变速箱壳体机械加工质量预测与诊断
14.
Design of a Ventilated Oil Steam Semiconductor Condenser for a Fuel Tank
油箱油蒸汽半导体冷凝通气器的设计
15.
SUN HYDRAULIK GMBH offers Offers to Screw-in valves, Globe valves and Valve housing.
提供轴承箱、轴承体、阀体、阀箱、阀套、阀门外壳及其它产品。
16.
Quality-control and Production of the Die Casting Cylinder-Block and Transmission Case
发动机缸体与变速箱壳体压铸生产及质量控制
17.
Developing of Rear Bridge Transmission Case Sieries
北汽福田后桥变速箱壳体系列产品开发
18.
Multistage Manufacturing Quality Control and Diagnosis Based on Gearbox Casing
变速箱壳体多工序机加工的质量控制与诊断