1.
Numerical Simulation on Flow and Temperature Fields in Quick Freezer with Perforated Plates
带有上下均风孔板的速冻装置中流场及温度场的数值模拟
2.
Perforated plates correspond to heterogeneous media.
多孔板相当于均匀介质。
3.
Microphone jacks are available at both front and back panels, which is not only beautiful, but also helpful for your fitting.
前后板均设有麦克风输入插孔，从整体美观到工程安装都极为方便。
4.
a board perforated with regularly spaced holes into which pegs can be fitted.
这块板子上面均匀地凿有孔，这些孔可以插钉子。
5.
Simplified Ultimate Bearing Capacity Calculating Method of Axially Compressed Simply Supported Perforated Thin-Walled Plates
单向均匀受压四边简支开孔板承载力近似计算
6.
Study on Air Flux Uniform Distributing in the Desiccator with the Guide Wind Panel
利用导风板使干燥箱内风量均匀分布的研究
7.
Devolatilization and Combustion in FBC and the Distributor with Unequal Vent Area Rate
沸腾炉内挥发份燃烧和变开孔率式布风板
8.
Investigation on bottom blockage affection on boundary layer of a plate with uniform suction in low speed wind tunnel
低速风洞均匀吸气地板下阻塞对地板边界层影响的研究
9.
Study on Wind-Induced Mean Internal Pressure of Long-Span Roof Building with Opening by Numerical Simulation;
大跨屋盖建筑开孔风致平均内压的数值模拟研究
10.
Black of the card
盲孔(纹板上无孔的部分)
11.
square-edged orifice
直角铣孔流量计孔板
12.
Drill a 12-mm (1/8-in) diameter hole in the top center of the fan shrou
在风扇围板顶部中心钻一个直径12毫米（1/8英寸）的孔。
13.
Numerical simulation of air quantity and pressure drop performance of perforated supply air terminals
多孔板送风末端流量与管路阻力特性的数值模拟
14.
Just the vertical plates used only, cooling air distribution in the grille brick can not be improved.
单独用竖直导流板不可能很好地实现冷风在格子砖内的均匀分布
15.
The Relationship between Mean Platelet Volume and the Clinical Disease Activity Indices of Rheumatoid Arthritis
类风湿关节炎活动期血小板平均体积变化的临床研究
16.
Round and square perforation plate screens-Thickness of 3 mm and above
GB/T10613-1989板厚≥3mm的圆孔和方孔筛板
17.
an oil lamp with a glass chimney and perforated metal lid to protect the flame from high winds; candlestick with a glass chimney.
一种有玻璃灯罩和金属穿孔板防止大风吹熄火焰的油灯；有玻璃灯罩的烛台。
18.
That includes the installation of windlasses, winches, bollards, fireleads, masts, deck cranes, vent pipes and different kinds of rigging.
包括以下部件的安装：锚机，绞车，带缆桩，导缆孔，桅杆，甲板起重机，通风口和各种索具。