1.
Changes on Mechanical Parameters of Collapsible Loess in Humidifying Terms
浅谈湿陷性黄土在增湿条件下的力学参数变化
2.
Other things being equal, the evapotranspiration rate decreases with increasing humidity.
当其它条件相同时，蒸散率随湿度增大而减小。
3.
The Mechanical Properties of Bamboo Reinforced Poplar Laminated Veneer Lumber(LVL) after Hot-moisture Treatment;
湿热条件下竹材增强单板层积材力学性能的研究
4.
Mechanics Responding Analysis on the Subgrade and Pavement under the Condition of Moistening Deformation of Expansive Soil Cutting;
膨胀土路堑增湿变形条件下的路基路面力学响应分析
5.
glass-reinforced thermosetting plastics(grp) pipes-determination of the creep factor under wet conditions and calculation of the longterm specific ring stiffness
玻璃增强热固性塑料管-潮湿条件下蠕变因子的测定和特定环状物的硬挺度计算
6.
Environmental condition for machinery products Warm-damp
GB/T14092.1-1993机械产品环境条件湿热
7.
Specification for damp heat test chambers
GB/T10586-1989湿热试验箱技术条件
8.
Technical requirements of hydro-cinnabar
GB/T3631-1983湿法朱砂技术条件
9.
Effects of Temperature and Relative Humidity (RH)on Postharvest Characteristics of Sphallerocarpus Gracills(Bess)
温、湿度条件对黄参贮藏特性的影响
10.
Anti-fatigue Properties of Asphalt Pavement in the Condition of High Temperature and Humidity;
高温潮湿条件下沥青面层抗疲劳性能
11.
The Research on Pectin Extraction from Wet Apple Pomace
湿苹果渣中提取果胶工艺条件的研究
12.
Effect of different humidity conditions on vegetative growth of Riciuns communis
不同湿度条件对蓖麻营养生长的影响
13.
Simulation of Mechanical Behavior of Plastic Electronic Package under Temperature and Humidity Environment;
温湿度条件下塑封电子器件力学行为的模拟
14.
Effect of Printing Conditions on Wet Picking and Wet Resistance of Paper
印刷条件对胶版纸和铜版纸湿拉毛、湿排斥性能的影响
15.
Internal combustion engines--Cast iron wet type cylinder liners--Specification
GB/T1150-1993内燃机湿式铸铁气缸套技术条件
16.
This suggests that the optimum for biological weathering would be in a hot, most climate.
这表明生物风化最适宜的条件是湿热气候。
17.
Environmental conditions appearing in nature of electric and electronic products--Temperature and humidity
GB/T4797.1-1984电工电子产品自然环境条件温度和湿度
18.
" Plastics-Test methods of exposure to damp heat,steady state"
GB/T12000-1989塑料在恒定湿热条件下曝露试验方法