1.
Optimization of Burden Structure with High-alumina Sinter plus V-Ti Magnetite
高铝烧结矿配加钒钛磁铁矿炉料结构优化研究
2.
Effects of Grain Size on Sintering Properties of High Iron Trihydrate Bauxite and Sinter Microstructure
粒度对高铁三水铝石型铝土矿烧结性能和烧结矿显微结构的影响
3.
Experimental Study on Australian Fine Ore Sintering with High Content of Crystal Water and Al_2O_3
鞍钢烧结使用高结晶水、高铝铁矿的实验室研究
4.
Thermodynamics of reaction of alumina during sintering process of high-iron gibbsite-type bauxite
高铁三水铝石型铝土矿烧结过程中氧化铝反应热力学
5.
Roasting pretreatment of high-sulfur bauxite and digestion performance of roasted ore
高硫铝土矿的焙烧预处理及焙烧矿的溶出性能
6.
Research to Produce Sintering Hollow Building Block with Tailing Bauxite Beneficiation
利用铝土矿选矿尾矿制造烧结空心砌块的试验研究
7.
Research on the Conditions of Sodium Sintering Process and the Infulence of Al_2O_3 Leaching Rate at Middle Grade Bauxite Contain Different Sulfur
中等品位铝土矿纯碱烧结法烧结条件及硫影响研究
8.
Treatment of High Iron Al-containing Resources by Reductive Sintering to Recover Al and Fe Comprehensively
还原烧结高铁含铝物料综合提取铝和铁
9.
Study on Sintering with High Proportion of Imported Iron Ore in Lingang
临钢高比例进口矿粉的烧结配矿研究
10.
As a result,the degree of utilization of bauxite resources by the Bayer Process is lower than that by the Sintering Process.
铝土矿资源利用率高低首先与采用工艺相关,拜耳法的资源利用率低于烧结法。
11.
Selective Grinding Analysis of High-alumina Clay Ore Based on Mineral Structure
基于矿物结构的高铝黏土矿选择性磨矿分析
12.
Roasting Pretreatment and Digestion Performance of High Sulfur Bauxite
高硫铝土矿流化焙烧预处理及溶出性能
13.
On the Settling Performance of Red Mud from Preroasted High-Sulfur Bauxite
高硫铝土矿焙烧预处理的赤泥沉降性能
14.
Production test of sinter ore with Australian ore to improve the sintering machine capacity
烧结配加澳矿生产试验提高烧结机利用系数
15.
Practice of Improving the Sinter Strength on the 90m~2 Sintering Machine in MaSteel;
马钢90m~2烧结机提高烧结矿强度的实践
16.
Practice About Raising Tumbler Strength of Western Zone Sinter on Ansteel
鞍钢西区烧结提高烧结矿转鼓强度的实践
17.
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
18.
Research on Composition of Mineral and Microstructural of High Basicity Sinter
高碱度烧结矿矿物组成及显微结构研究