1.
The Application of Tundish Plug Rod Blowing Argon in Vacuum Pouring of Ingot
中间包塞棒吹氩在钢锭真空浇注中的应用
2.
Study on Inclusions Removal by Soft Bubbling in Ladle
钢包软吹氩对钢中非金属夹杂物去除效果研究
3.
Argon flow control in the process of bottom blowing argon in a LF
氩气流量控制在钢包精炼炉底吹中的实现
4.
NUMERICAL SIMULATION OF FLUID FLOW IN A LADLE DURING ARGON BOTTOM BLOWING REFINING PROCESS
底吹氩精炼过程中钢包内流体流动的数值模拟
5.
Technology for Long Life of Tundish and Non-stopper Steel Stream Protection of Billet Continuous Casting in ANYANG Iron & Steel Group Co. LTD;
安钢小方坯连铸中间包长寿及无塞棒控流保护浇注工艺研究
6.
Mathematical model of molten steel circulation in ladle with Ar blast
钢包吹氩时钢液循环流动过程数学模型研究
7.
Analysis and Improvement of Permeable bricks' rupture for Ladle Bottom Argon Bubbling Purpose
钢包底吹氩透气砖断裂原因分析及改进措施
8.
Mathematical modelling of erosion of ladle lining with argon blowing at bottom
底吹氩钢包内衬蚀损行为的数值模拟研究
9.
Influence of Bottom Blowing Argon on Nonmetallic Inclusions in Electric Resistance Alloy Cr20Ni35
钢包底吹氩对电热合金Cr20Ni35非金属夹杂物的影响
10.
Improvement on Converter Alloy Chute and Ladle Argon Bottom Blowing System
转炉合金溜槽和钢包连续底吹氩气的改造
11.
A Study on Water Modeling of Ladle with Bottom Argon Blowing in Critical Slag Entrapment Condition
钢包底吹氩卷渣临界条件的水模型研究
12.
Mathematical and Hydromechanical Simulation on Fluid Flow in Argon Blowing Process in Ladle Furnace;
LF吹氩过程中钢液流动的数学物理模拟
13.
The Study of Water Modeling and Mathematical Simulation on 40t LF Ladle about Argon Bottom Blowing and Drain Operations;
40tLF钢包吹氩搅拌及出钢操作的数值模拟和实验研究
14.
A Study of Water Model for Effect of Ladle Bottom Argon Blowing Position on Inclusion Removal from Liquid Steel
钢包底吹氩位置对钢水去夹杂影响的水模型研究
15.
Simulation Study on Optimization of the Structure and Bottom Gas Blowing of Slab Continuous Casting Tundish
板坯连铸中间包结构优化及底吹气模拟研究
16.
Application of Argon MAP Technology in Packaging of Fresh Cherries
氩气MAP技术在樱桃保鲜包装中的应用
17.
Influence of slit number and size on thermal gradient stress of purging plug during argon blowing
吹氩期间狭缝数量和尺寸对透气砖热梯度应力的影响
18.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。